I have installation issues with 2022.7.0 of HA running in a docker container. I followed the recommendations given in the (identical but closed) issue #83, I tried to remove rpi_gpio from my config, uninstall integration, restart HA, install integration, restart HA, and everything is fine in the log. But as soon I add the rpi_gpio integration config in the yaml, I get the installation error in the log during the config check : Platform error switch.rpi_gpio - Requirements for rpi_gpio not found: ['RPi.GPIO==0.7.1'].

And more detail in the container's log :

2022-07-07 11:59:56 ERROR (SyncWorker_1) [homeassistant.util.package] Unable to install package RPi.GPIO==0.7.1: error: subprocess-exited-with-error
  × python setup.py bdist_wheel did not run successfully.
  │ exit code: 1
  ╰─> [15 lines of output]
      running build
      running build_py
      creating build
      creating build/lib.linux-armv7l-cpython-310
      creating build/lib.linux-armv7l-cpython-310/RPi
      copying RPi/__init__.py -> build/lib.linux-armv7l-cpython-310/RPi
      creating build/lib.linux-armv7l-cpython-310/RPi/GPIO
      copying RPi/GPIO/__init__.py -> build/lib.linux-armv7l-cpython-310/RPi/GPIO
      running build_ext
      building 'RPi._GPIO' extension
      creating build/temp.linux-armv7l-cpython-310
      creating build/temp.linux-armv7l-cpython-310/source
      error: command 'gcc' failed: No such file or directory
      [end of output]
  
  note: This error originates from a subprocess, and is likely not a problem with pip.
  ERROR: Failed building wheel for RPi.GPIO
  error: subprocess-exited-with-error
  × Running setup.py install for RPi.GPIO did not run successfully.
  ╰─> [17 lines of output]
      running install
      /usr/local/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
        warnings.warn(
error: legacy-install-failure
× Encountered error while trying to install package.
╰─> RPi.GPIO
note: This is an issue with the package mentioned above, not pip.
hint: See above for output from the failure.

The YAML looks like this :

- platform: rpi_gpio
  switches:
    - port: 5
      name: "Volet Cuisine Montée"
      invert_logic: true
    - port: 6
      name: "Volet Cuisine Descente"
      invert_logic: true
    - port: 13
      name: "Volet Baie Sud-Est Montée"
      invert_logic: true
    - port: 16
      name: "Volet Baie Sud-Est Descente"
      invert_logic: true
    - port: 19
      name: "Volet Baie Sud-Ouest Montée"
      invert_logic: true
    - port: 20
      name: "Volet Baie Sud-Ouest Descente"
      invert_logic: true
    - port: 21
      name: "Volet Bureau Montée"
      invert_logic: true
    - port: 26
      name: "Volet Bureau Descente"
      invert_logic: true

Hi there,

After updating to the latest core my supervised home assistant won't restart with the following error in the log: The system cannot restart because the configuration is not valid: Platform error binary_sensor.rpi_gpio - Requirements for rpi_gpio not found: ['RPi.GPIO==0.7.1a4']. The system cannot restart because the configuration is not valid: Platform error binary_sensor.rpi_gpio - Integration 'rpi_gpio' not found.

Breaking Changes

The Raspberry Pi GPIO integration migrated to configuration via the UI. Configuring Raspberry Pi GPIO via YAML configuration has been deprecated and will be removed in a future Home Assistant release.

Your existing YAML configuration is automatically imported on upgrade to this release; and thus can be safely removed from your YAML configuration after upgrading (will be added in a separate PR)

Proposed Changes

• Add configuration flow for Raspberry Pi GPIO integration.
• Limit PR to only binary sensors

Configuring ports through the UI:

• Add Raspberry Pi GPIO from the integrations page. It will prompt to select a platform (currently only binary_sensor is included. Other platforms will be added in future PRs)
• Select the port from the list of available ports
• Port will be configured with default settings. Settings can be updated through options.

I use a devops pipeline for my HA yaml changes, and part of the pipeline executes a "ha core check" before restarting HA. I am pretty sure as I have upgraded to 2022.6.7 my pipelines fail at "ha core check" with the following:

[email protected]:~/myagent/_work/_temp $ ha core check Error: Testing configuration at /config INFO:homeassistant.util.package:Attempting install of spotify_token==1.0.0 INFO:homeassistant.util.package:Attempting install of RPi.GPIO==0.7.1a4 ERROR:homeassistant.util.package:Unable to install package RPi.GPIO==0.7.1a4: error: subprocess-exited-with-error

× python setup.py bdist_wheel did not run successfully. │ exit code: 1 ╰─> [15 lines of output] running bdist_wheel running build running build_py creating build creating build/lib.linux-armv7l-cpython-310 creating build/lib.linux-armv7l-cpython-310/RPi copying RPi/init.py -> build/lib.linux-armv7l-cpython-310/RPi creating build/lib.linux-armv7l-cpython-310/RPi/GPIO copying RPi/GPIO/init.py -> build/lib.linux-armv7l-cpython-310/RPi/GPIO running build_ext building 'RPi._GPIO' extension creating build/temp.linux-armv7l-cpython-310 creating build/temp.linux-armv7l-cpython-310/source gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -fno-semantic-interposition -fno-builtin-malloc -fno-builtin-calloc -fno-builtin-realloc -fno-builtin-free -DTHREAD_STACK_SIZE=0x100000 -fPIC -I/usr/local/include/python3.10 -c source/c_gpio.c -o build/temp.linux-armv7l-cpython-310/source/c_gpio.o error: command 'gcc' failed: No such file or directory [end of output]

** loads of similar errors after this all related to 'gcc' failed

Its possible I havent run the pipeline before the upgrade and the error may have come before 2022.6.7. The rpi.gpio covers I have still work in HA, so not sure if this error is to do with HA, rpi.gpio or my specific setup, if you could give me some pointers to look for?

Thanks, Alastair

Logger: homeassistant.components.hassio Source: components/hassio/init.py:682 Integration: Home Assistant Supervisor (documentation, issues) First occurred: July 7, 2022 at 11:53:38 PM (2 occurrences) Last logged: July 7, 2022 at 11:56:30 PM

The system cannot restart because the configuration is not valid: Platform error switch.rpi_gpio - Integration 'rpi_gpio' not found. Platform error switch.rpi_gpio - Requirements for rpi_gpio not found: ['RPi.GPIO==0.7.1a4'].

from configuration.yaml:

cover:
  - platform: rpi_gpio
    relay_time: 0.1
    invert_relay: false
    state_pull_mode: "UP"
    invert_state: true
    covers:
      - relay_pin: 17
        name: "ha esp32 reset"

from log:

Logger: homeassistant.components.cover
Source: custom_components/rpi_gpio/cover.py:75
Integration: Cover ([documentation](https://www.home-assistant.io/integrations/cover), [issues](https://github.com/home-assistant/home-assistant/issues?q=is%3Aissue+is%3Aopen+label%3A%22integration%3A+cover%22))
First occurred: 21:32:12 (1 occurrences)
Last logged: 21:32:12

Error while setting up rpi_gpio platform for cover
Traceback (most recent call last):
  File "/usr/src/homeassistant/homeassistant/helpers/entity_platform.py", line 249, in _async_setup_platform
    await asyncio.shield(task)
  File "/usr/local/lib/python3.9/concurrent/futures/thread.py", line 58, in run
    result = self.fn(*self.args, **self.kwargs)
  File "/config/custom_components/rpi_gpio/cover.py", line 75, in setup_platform
    cover[CONF_STATE_PIN],
KeyError: 'state_pin'

@thecode sorry for writing here, but I didn't find a better way. As you probably know in HA 2022.6 GPIO support will be removed, and with it also 1-Wire SysBus will be gone (https://github.com/home-assistant/core/pull/71232). You did an awesome job by maintaining this repository and many (including me) are very grateful for that. Do you use 1-Wire sensors in your setup? I have a homemade floor heating system that is controlled by 1-wire sensors, so I must stay with HA 2022.5.x. maybe you could recommend other solution or maybe create a fork as you did with rpi_gpio.

Do you have a buy-me-a-coffee account or patreon? Many users would like to thank you not just by words :)

Hi, I tried with all the suggestions in other posts but still not working. Removed the configuration, restarted Deleted RPI_GPIO, restarted Installed RPI_GPIO, restarted Added configuration, restarted

Here is the error:

The following integrations and platforms could not be set up:

[rpi_gpio](https://github.com/thecode/ha-rpi_gpio) 
rpi_gpio.binary_sensor
rpi_gpio.switch 

Here the configuration

switch:

• platform: rpi_gpio invert_logic: true ports: 5: Switch5_libero 6: Luce sirena allarme_sw6 13: Cicalino_inserimento_allarme_13 19: Sirena_allarme_19

binary_sensor:

• platform: rpi_gpio invert_logic: true ports: 2: VOLUMETRICO BAGNO #GPIO2 3: SENSORE PORTA BAGNO #GPIO3 4: VOLUMETRICO GARAGE #GPIO4 7: PORTA INGRESSO #GPIO7 8: VOLUMETRICO SALA #GPIO8 9: FREE

Can you help me?

When I update from 2022.2.3 to 2022.3.0, and the download and install completes. Home Assist. directs me to restart. Once the restart completes, Home Assist states the same version update is available for download and install.

Hi,

I have recently installed the custom rpi_gpio integration for Home Assistant 2022.2.9 via HACS. Although all the gpio attached switches and sensors are working within Home Assistant, I do see the follow error logged which comes up now and then.

This error originated from a custom integration.

Logger: root Source: custom_components/rpi_gpio/binary_sensor.py:85 Integration: Raspberry Pi GPIO (documentation, issues) First occurred: 9:00:21 AM (2 occurrences) Last logged: 9:00:22 AM

Uncaught exception Traceback (most recent call last): File "/config/custom_components/rpi_gpio/binary_sensor.py", line 85, in edge_detected self.hass.add_job(self.async_read_gpio) AttributeError: 'NoneType' object has no attribute 'add_job'

I want to control the CPU fan on my Raspberry Pi 3, so I've added the Home Assistant Raspberry Pi GPIO custom integration through HACS. Then I've added the following to /root/config/configuration.yaml:

switch:
  - platform: rpi_gpio
    switches:
      - port: 3
        name: "Fan"

I've restarted Home Assistant, but I don't have an entity called "Fan". Also, there's nothing in the log about "fan" or "gpio". What am I doing wrong?

The system cannot restart because the configuration is not valid: Invalid config for [binary_sensor.rpi_gpio]: expected a dictionary @ data['sensors'][0]. Got 'port:23 name:"Main_Door"'