♟️ QR Code display for P4wnP1 (SSH, VNC, any text / URL)

Overview

♟️ Display QR Codes on P4wnP1 (p4wnsolo-qr)

🟢 QR Code display for P4wnP1 w/OLED (SSH, VNC, P4wnP1 WebGUI, any text / URL / exfiltrated data)

Note: The script currently checks the WiFi (Client-mode) IP Address. I didn't add other IP addresses in yet (such as Ethernet Gadget IP Address, etc) because this is a work-in-progress, and the current version is more of a demo than anything.

  • This script package gives your P4wnP1 w/OLED screen the ability to generate and display QR Codes directly on the OLED screen. The intented purpose is to run this script when P4wnP1 boot up (see below for How to Run on Boot instructions).

  • This way you can see your P4wnP1's IP address automatically (and scan the QR Code with a phone) after P4wnP1 boots up, without having to do anything else. Ideally, this method of displaying (and optionally scanning) would save time in your workflow and make on-the-go operations faster & more plausible.

  • Additionally, I hope to add this into BeBoXGui / p4wnsolo-dashboard as a core component in a group of OLED display scripts.

Now for the real stuff:

Example of P4wnP1 showing QR Code to connect to Raspberry Pi via SSH:

Requirements:

🔵 Raspberry Pi (any model should work - Tested Dec 12 '21 on RPi 0 W running P4wnP1 ALOA)
🔵 1.3" OLED Hat (SH1106)
🔵 Luma.oled drivers installed

How to Install Luma & Luma OLED:

sudo pip3 install luma luma.oled

🔨 Usage:

Clone the repo

git clone https://github.com/p4wnsolo/p4wnsolo-qr.git

Change directories

cd p4wnsolo-qr

Launch the script

python3 p4wnsolo-qr.py -i spi --display sh1106

🚀 Optional: Start on Boot

First, we run this command to open the crontab edit screen:
crontab -e
Then move the cursor to the first empty line and Paste this:

@reboot sudo /usr/bin/python3 /root/p4wnsolo-qr.py &&

BEFORE YOU REBOOT: Just run a quick test to verify p4wnsolo-qr.py is actually in the filepath above (or change the line above).

How do I test the crontab entry before I reboot?

Test the crontab entry by running the command above (without the "@reboot" part or "&&" part) in the Command Line before rebooting. Ex:

sudo /usr/bin/python3 /path/to/file/p4wnsolo-qr.py

If running the command above launches the script successfully, then you can use that same command in crontab (with "@reboot" before and "&&" after)!
Note: If your OLED screen is already displaying something using Python, you'll have to kill that script before running P4wnSolo-QR so they don't fight for screen access:

pkill -f "yourScriptNameHere.py"

📷 Sample QR Code:

See the images in this Repo (p4wnsolo-qr-code-XYZ.jpg) or scroll down for example display screens.

🕷 Extra:

The default operating mode is ssh, which generates a QR Code to connect to Raspberry Pi via SSH. There's also a spiderfoot option, which generates a QR Code to connect to Spiderfoot server running on Raspberry Pi. The Spiderfoot feature has not yet been implemented (doesn't check to see if Spiderfoot is running). But if you want to see the "demo" of Spiderfoot QR Code mode, here's how:

  1. Open p4wnsolo-qr.py in text editor
  2. Near Line 25, you'll see something like this: ##### Set mode here
  3. Comment out the line that says themode = 'ssh'
  4. Uncomment the line that says themode = 'spiderfoot' In the works:
  • Add themode code entries for P4wnP1 WebGUI URL

📷 Screenshots

Generating QR Code for SSH

Displaying QR Code for SSH

Generating QR Code for Spiderfoot

Displaying QR Code for Spiderfoot

After Pressing + Button for More Time

File Requirements

These Files Must Be in the Same Folder as p4wnsolo-qr.py:
  • DroidSansMono.ttf - Font for small text on OLED screens
  • Prototype.ttf - Font for "Generating QR Code" screen
  • SH1106.py - Library for displaying things on SH1106 OLED screen
  • SH1106.pyc - Config file for ^
  • config.py - Config file
  • config.pyc - Config file
  • demo_opts.py - Config file

Thanks to

BeBoX

Rogan.Dawes

MaMe82

for the excellent work and inspiration

You might also like...
Create (templateable) cameras that display qr codes in homeassistant
Create (templateable) cameras that display qr codes in homeassistant

QRCam This custom component creates cameras displaying qrcodes. The QRCodes can be static or generated from templates. If you use a template as conten

 OpenStickFirmware is open source software designed to handle any and all tasks required in a custom Fight Stick
OpenStickFirmware is open source software designed to handle any and all tasks required in a custom Fight Stick

OpenStickFirmware is open source software designed to handle any and all tasks required in a custom Fight Stick. It can handle being the brains of your entire stick, or just handling the bells and whistles while your Brook board talks to your console.

Easyeda2kicad.py - Convert any LCSC components (including EasyEDA) to KiCad library

easyeda2kicad.py A Python script that convert any electronic components from LCSC or EasyEDA to a Kicad library Installation git clone https://github.

A python script for macOS to enable scrolling with the 3M ergonomic mouse EM500GPS in any application.

A python script for macOS to enable scrolling with the 3M ergonomic mouse EM500GPS in any application.

Run this code to blink your ThinkPad LED with a hidden mysterious Morse code! ;)
Run this code to blink your ThinkPad LED with a hidden mysterious Morse code! ;)

TMorse Run this code to blink your ThinkPad LED with a hidden mysterious Morse code! ;) Compatible with python3.9+. No third-party library is required

Raspberry Pi Pico support for VS Code
Raspberry Pi Pico support for VS Code

Pico-Go VS Code Extension Pico-Go provides code auto-completion and allows you to communicate with your Raspberry Pi Pico board using the built-in REP

This repository contains all the code and files needed to simulate the notspot quadrupedal robot using Gazebo and ROS.
This repository contains all the code and files needed to simulate the notspot quadrupedal robot using Gazebo and ROS.

Notspot robot simulation - Python version This repository contains all the files and code needed to simulate the notspot quadrupedal robot using Gazeb

Simple Python script to decode and verify an European Health Certificate QR-code

A simple Python script to decode and verify an European Health Certificate QR-code.

Python code written to utilize the Korlan usb2can hardware to send and receive data over the can-bus on a 2008 Nissan 350z

nissan_ecu_hacking Python code written to utilize the Korlan usb2can hardware to send and receive data over the can-bus on a 2008 Nissan 350z My goal

Releases(alpha)
  • alpha(Dec 12, 2021)

Owner
PawnSolo
I was born in a factory and designed to p4wn
PawnSolo
An alternative to Demise-Assistant-Batch made entirely in Python for more capabilities.

Demise-Assistant-Python An alternative to Demise-Assistant-Batch made entirely in Python for more capabilities. IMPORTANT NOTE Demise-Assistant-Batch

SkelOrganisation 1 Nov 24, 2021
Uses the Duke Energy Gateway to import near real time energy usage into Home Assistant

Duke Energy Gateway This is a custom integration for Home Assistant. It pulls near-real-time energy usage from Duke Energy via the Duke Energy Gateway

Michael Meli 28 Dec 23, 2022
Iec62056-21-mqtt - Publish DSMR P1 telegrams acquired over IEC62056-21 to MQTT

IEC 62056-21 Publish DSMR P1 telegrams acquired over IEC62056-21 to MQTT. -21 is

Marijn Suijten 1 Jun 05, 2022
I made this so I can control my Tapo L510 light bulb and Govee H6159 light strip using the PyP100 module and the Govee public API

TAPO-And-Govee-Controller I made this so I can control my Tapo L510 light bulb and Govee H6159 light strip using the PyP100 module and the Govee publi

James Westhead 0 Nov 23, 2021
A Python class for controlling the Pimoroni RGB Keypad for Raspberry Pi Pico

rgbkeypad A Python class for controlling the Pimoroni RGB Keypad for the Raspberry Pi Pico. Compatible with MicroPython and CircuitPython. keypad = RG

Martin O'Hanlon 43 Nov 11, 2022
Fener ROS2 package version 2

Fener's ROS2 codes that runs on the vehicle. This node contains basic sensing and actuation nodes for vehicle control. Also example applications will be added.

Muhammed Sezer 1 Jan 18, 2022
Home Assistant custom components MPK-Lodz

MPK Łódź sensor This sensor uses unofficial API provided by MPK Łódź. Configuration options Key Type Required Default Description name string False MP

Piotr Machowski 3 Nov 01, 2022
A Home Assistant sensor that tells you what holiday is next

Next Holiday Sensor This sensor tells you what holiday is coming up next. You can use it to set holiday light colors or other scenes. The state of the

Nick Touran 20 Dec 04, 2022
Python module for controlling Broadlink RM2/3 (Pro) remote controls, A1 sensor platforms and SP2/3 smartplugs

Python module for controlling Broadlink RM2/3 (Pro) remote controls, A1 sensor platforms and SP2/3 smartplugs

Matthew Garrett 1.2k Jan 04, 2023
An open source operating system designed primarily for the Raspberry Pi Pico, written entirely in MicroPython

PycOS An open source operating system designed primarily for the Raspberry Pi Pico, written entirely in MicroPython. "PycOS" is an combination of the

8 Oct 06, 2022
Create a low powered, renewable generation forecast display with a Raspberry Pi Zero & Inky wHAT.

GB Renewable Forecast Display This Raspberry Pi powered eInk display aims to give you a quick way to time your home energy usage to help balance the g

Andy Brace 32 Jul 02, 2022
Example code to sending USB Gadget multimedia keys via Python

Send Multimedia USB HID Keys via Python As an USB Gadget in Linux This gives a simple script with zero dependencies that can easily run on any Linux d

DevOps Nirvana 2 Jan 02, 2023
Automatic CPU speed & power optimizer for Linux

Automatic CPU speed & power optimizer for Linux based on active monitoring of laptop's battery state, CPU usage, CPU temperature and system load. Ultimately allowing you to improve battery life witho

Adnan Hodzic 3.4k Jan 07, 2023
OpenStickFirmware is open source software designed to handle any and all tasks required in a custom Fight Stick

OpenStickFirmware is open source software designed to handle any and all tasks required in a custom Fight Stick. It can handle being the brains of your entire stick, or just handling the bells and wh

Sleep Unit 23 Nov 24, 2022
Component for deep integration LedFx from Home Assistant.

LedFX for Home Assistant Component for deep integration LedFx from Home Assistant. Table of Contents FAQ Install Config Performance FAQ Q. What versio

Dmitry Mamontov 28 Dec 13, 2022
Detic ros - A simple ROS wrapper for Detic instance segmentation using pre-trained dataset

Detic ros - A simple ROS wrapper for Detic instance segmentation using pre-trained dataset

Hirokazu Ishida 12 Nov 19, 2022
Home Assistant custom integration for Yi cameras: yi-hack-MStar, yi-hack-Allwinner and yi-hack-Allwinner-v2

yi-hack Home Assistant integration Overview yi-hack Home Assistant is a custom integration for Yi cameras (or Sonoff camera) with one of the following

roleo 131 Jan 03, 2023
Red Light Green Light Robot

Red Light Green Light Robot The primary problem addressed by our project is robotic follower behavior i.e. maintaining distance from a moving target.

Will Romano 2 Nov 20, 2021
Robot Framework keyword library wrapper for atlassian-python-api

Robot Framework keyword library wrapper for atlassian-python-api

Marcin Koperski 3 Jul 29, 2022
PlatformIO development platform for GSM modules

PlatformIO development platform for GSM modules Supported Modules Quectel M66 OpenCPU Arduino - TODO other - in progress... Supported Boards Comet M66

Georgi Angelov 5 Aug 06, 2022