Switch predictor for Home Assistant with AppDeamon

Overview

Home Assistant AppDeamon - Event predictor

"Buy Me A Coffee"

WORK IN PROGRESS - CURRENTLY NOT COMPLETE AND NOT WORK

This is an idea under development (when I have free time)

I am Italian, sorry for any mistakes in English.

I want to try it right now!

No, wait.

This is a program in Python that I'm making in my spare time and is currently unfinished.

To try it and possibly contribute (thanks!) these are the ingredients:

  • knowledge of Python

  • a working instance of Home Assistant

  • the appDeamon addon correctly installed and running

The idea (and the dream)

My goal (and dream) is for Home Assistant to decide autonomously when it is appropriate to activate a certain event, based on the history of one or more switches, relating the date and time and the status of other sensors. Based on the calculations performed, if the level of certainty is high it could directly activate the switch, or if it is low (uncertain) it could ask through Alexa (Amazon) if you want to proceed with the activation and based on the answer given it could even modify its data model.

Use case example

  • An automation is automatically created to start the robot vacuum cleaner when nobody is at home, the time slot is from 14:00 to 18:00, the balcony door is closed and the humidity is below 60%.

  • An automation is automatically created to turn on the television when someone is at home, it is between 20:00 and 22:00, dinner is being served, the temperature in the house is above 22°C and there is no upcoming appointment on the calendar.

  • Asked if you want coffee if the time slot is from 12:00 to 14:00, someone is at home, you have just finished having lunch, the temperature at home is below 25°C - if not, the model is modified

Warning: all these automatic automations are based on actions already performed previously, according to probabilistic calculations.

It is not foreseen that the system considers to ask or to execute actions in a completely spontaneous way.

Progress & ToDo

  • (OP#1) Getting the history of a specific switch in specified time period

  • (DF#1) Getting the history from influxdb

  • (OP#2) Getting the history of all connected sensors

  • Caching the history

  • (OP#3) get time slot from the history of the based on sensors

  • (OP#4) Filters the BaseSwitch periodOn data by excluding insignificant events

  • (OP#5) Save the model (and reuse for caching)

  • (OP#6) Listen of variation on baseOnSensor

  • (OP#7) Send an event to Home Assistant with the potential switch

  • (Thanks @Pirol62) consider the variation of time (season, year, ecc...)

  • Optimizing Code

  • Testing

  • more Testing :)

Operation diagram

  1. (OP#1) Getting the history of a specific switch (baseSwitch) in specified time period (by config)

  2. (OP#2) Getting the history of all connected sensors (basedOnSensor - declared on Config) in the time interval in which baseSwitch has been activated (on) since a time specified in configuration

  3. (OP#3) From the history of the various sensors (basedOnSensor), when they change state, group the times by rounding them to a value specified in the configuration, thus obtaining the day of the week, the hour, the minutes of the event and calculate the frequency of repetition

  4. (OP#4) Discard the data that are not satisfactory or because they are too few (by config)

  5. (OP#5) Save the model

  6. (OP#6) Listen to the variations of the basedOnSensor and compare them with the results of the model

  7. (OP#7) Send an event to Home Assistant with the potential switch to manage the probability of it happening. It will be in Home Assistant that will decide what to do, whether to activate the switch or ask the user if they want to activate it.

Problems and difficulties

  1. (DF#1) Unfortunately, I realized that I can't rely on HomeAssistant's history, because the save range for the data is very limited. I have to get the data from influxDB

Want to help? You are welcome!

This is and shall be an open, free and non-profit project; the goal is to create an automated system to manage situations in HomeAssistant.

Or, if you want to thank me for what I do by buying me a coffee:

"Buy Me A Coffee"

No one should and will ever make money from this project.

If you want to help me in any way (advice, code, etc...) you are welcome to do so and I really thank you very much! Use the tools that Github provides!

Raspberry Pi Spectrometer

PySpectrometer 2021-03-05 Raspberry Pi Spectrometer The PySpectrometer is a Python (OpenCV and Tkinter) implementation of an optical spectrometer. The

Les Wright 538 Jan 05, 2023
A ESP32 project template with a web interface built in React

ESP AP Webserver demo.mp4 This is my experiment with "mobile app development" for the ESP32. The project consists of two parts, the ESP32 code and the

8 Dec 15, 2022
A DiY holiday project to demonstrate how you can send data from adafruitIO cloud to a balena edge device

holiday-star balena ❤️ adafruitIO Introduction A DiY holiday project to demonstrate how you can send data from adafruitIO cloud to a balena edge devic

Ayan Pahwa 3 Dec 20, 2021
SALUS THERMOSTAT Custom component for Home-Assistant

Home-Assistant Custom Components Custom Components for Home-Assistant (http://www.home-assistant.io) Salus Thermostat Climate Component My device is R

21 Dec 18, 2022
A small Python app to converse between MQTT messages and 433MHz RF signals.

mqtt-rf-bridge A small Python app to converse between MQTT messages and 433MHz RF signals. This acts as a bridge between Paho MQTT and rpi-rf. Require

David Swarbrick 3 Jan 27, 2022
Port of Uxn to digital hardware in the Logisim simulator

Uxn-Logisim Implements the Uxn instruction set in digital hardware. Very WIP. Contents cpu.circ - The Logisim file microcode.mc - Microcode source fil

DeltaF1 11 Mar 27, 2022
Fener ROS2 package version 2

Fener's ROS2 codes that runs on the vehicle. This node contains basic sensing and actuation nodes for vehicle control. Also example applications will be added.

Muhammed Sezer 1 Jan 18, 2022
An alternative to Demise-Assistant-Batch made entirely in Python for more capabilities.

Demise-Assistant-Python An alternative to Demise-Assistant-Batch made entirely in Python for more capabilities. IMPORTANT NOTE Demise-Assistant-Batch

SkelOrganisation 1 Nov 24, 2021
Create a low powered, renewable generation forecast display with a Raspberry Pi Zero & Inky wHAT.

GB Renewable Forecast Display This Raspberry Pi powered eInk display aims to give you a quick way to time your home energy usage to help balance the g

Andy Brace 32 Jul 02, 2022
Pylorawan is a Micropython wrapper for lorawan devices from RAK Wireless.

pylorawan Pylorawan is a Micropython wrapper for lorawan devices from RAK Wireless. Tested on a Raspberry PI Pico with a RAK4200(H) Evaluation Board (

Peter Houghton 3 Nov 04, 2022
An open source two key macro-pad modeled to look like a cartoony melting popsicle

macropopsicle An open source two key macro-pad modeled to look like a cartoony melting popsicle. Build instructions Parts List -1x Top case half (3D p

17 Aug 18, 2022
Skykettle ha - Redmond SkyKettle integration for Home Assistant

Redmond SkyKettle integration for Home Assistant This integration allows to cont

Alexey 'Cluster' Avdyukhin 48 Jan 06, 2023
Pure micropython ESP32 SPI driver for sdcard and screen at the same SPI bus

micropython-esp32-spi-sdcard-and-screen-driver Proof of concept of Pure micropython espidf SPI driver for sdcard with screen at the same SPI bus (exam

Thomas Favennec 7 Mar 14, 2022
This repo uses a stereo camera and gray-code-based structured light to realize dense 3D reconstruction.

Structured-light-stereo This repo uses a stereo camera and gray-code-based structured light to realize dense 3D reconstruction. . How to use: STEP 1:

FEI 20 Dec 31, 2022
Unofficial Playdate reverse-engineering notes/tools - covers file formats, server API and USB commands

Unofficial Playdate reverse-engineering notes/tools - covers file formats, server API and USB commands ⚠️ This documentation is unofficial and is not

James 106 Dec 31, 2022
This application works with serial communication. Use a simple gui to send and receive serial data from arduino and control leds and motor direction

This application works with serial communication. Use a simple gui to send and receive serial data from arduino and control leds and motor direction

ThyagoKZKR 2 Jul 18, 2022
Python implementation of ZMP Preview Control approach for biped robot control.

ZMP Preview Control This is the Python implementation of ZMP Preview Control app

Chaobin 24 Dec 19, 2022
Huawei Solar sensors for Home Assistant

Huawei Solar Sensors This integration splits out the various values that are fetched from your Huawei Solar inverter into separate HomeAssistant senso

Thijs Walcarius 151 Dec 31, 2022
Modeling and Simulation of Satellite Servicing Manipulators

Modeling and Simulation of Satellite Servicing Manipulators Final Project for the course ENPM662: Introduction to Robot Modeling (Fall 2021). This pro

Adarsh M 1 Jan 24, 2022
Simple Microservice to control 433Mhz wireless sockets over HTTP, e.g. on a RaspberryPi

REST-light is a simple microservice to control 433Mhz wireless sockets over HTTP, e.g. on a RaspberryPi. The main usage is an easy integration of 433M

Pascal Höhnel 1 Jan 09, 2022