Sticklog2heatmap - Draw a heatmap of RC sticks from OpenTX logs or USB HID device

Overview

sticklog2heatmap

Draw a heatmap of RC sticks from OpenTX logs or USB HID device

Important notice

If using built binaries from here use sitcklog2heatmap.exe instead of python sticklog2heatmap.py. The same applies for hid2sticklog.exe

sticklog2heatmap.py

The tool that draws a png file with the heatmap

Usage:

python sticklog2heatmap.py

Opens all csv files in current directory

python sticklog2heatmap.py [filename1.csv]...[filenameN.csv]

Clear as is

python sticklog2heatmap.py [dirname]

Opens all csv files in dirname

Requirements:

  • numpy
  • opencv-python
  • matplotlib

Install with pip or any other preferred way

hid2sticklog.py

The tool to grab logs from the radio handset connected to the computer e.g. when flying in a simulator

Usage:

Simply run the script with python. If threre's more than one supported device in system the script will prompt.

Requirements:

  • hid from pip or anywhere else
  • hidapi library file in the same directory depending on your platform (e.g. hidapi.dll for windows)
You might also like...
A simple portable USB MIDI controller based on Raspberry-PI Pico and a 16-button keypad, written in Circuit Python

RPI-Pico-16-BTn-MIDI-Controller-using-CircuitPython A simple portable USB MIDI controller based on Raspberry-PI Pico, written in Circuit Python. Link

Unofficial Playdate reverse-engineering notes/tools - covers file formats, server API and USB commands

Unofficial Playdate reverse-engineering notes/tools - covers file formats, server API and USB commands ⚠️ This documentation is unofficial and is not

A python file which I wrote to allow the Dorna Robots API to draw an Image on a 3D plane
A python file which I wrote to allow the Dorna Robots API to draw an Image on a 3D plane

Dorna-Robotics-Internship Code In the directory "Code" is a python file which I wrote to allow the Dorna Robots API to draw an Image on a 3D plane. I

Automatically draw a KiCad schematic for a circuit prototyped on a breadboard.
Automatically draw a KiCad schematic for a circuit prototyped on a breadboard.

Schematic-o-matic Schematic-o-matic automatically draws a KiCad schematic for a circuit prototyped on a breadboard. How It Works The first step in the

Provide Unifi device info via api to Home Assistant that will give ap sensors
Provide Unifi device info via api to Home Assistant that will give ap sensors

Unifi AP Device info Provide Unifi device info via api to Home Assistant that will give ap sensors

A Python program that makes it easy to manage modules on a CircuitPython device!
A Python program that makes it easy to manage modules on a CircuitPython device!

CircuitPython-Bundle-Manager-v2 A Python program that makes it easy to manage modules on a CircuitPython device! The CircuitPython Bundle Manager v2 i

How to configure IOMMU device for nested Proxmox hypervisor (PVE) VM - PCIe Passthrough
How to configure IOMMU device for nested Proxmox hypervisor (PVE) VM - PCIe Passthrough

Configuring PCIe Passthrough for Nested Virtualization on Proxmox Summary: If you are running bare-metal L0 (level 0) Proxmox (PVE) hypervisor with ne

A DiY holiday project to demonstrate how you can send data from adafruitIO cloud to a balena edge device
A DiY holiday project to demonstrate how you can send data from adafruitIO cloud to a balena edge device

holiday-star balena ❤️ adafruitIO Introduction A DiY holiday project to demonstrate how you can send data from adafruitIO cloud to a balena edge devic

Python library to interact with the GCE Electronics IPX800 device
Python library to interact with the GCE Electronics IPX800 device

A python library to control a GCE-Electronics IPX800 V4 device through its API.

Releases(0.1)
  • 0.1(Feb 2, 2022)

    Built win64 binaries with pyinstaller. hidapi.dll is still needed for hid2sticklog, grab it somewhere here. You don't even need to open the console (cmd or PowerShell):

    • Doubleclick hid2sticklog.exe to record a log, Press Ctrl+C to save and exit.
    • Doubleclick sticklog2heatmap.exe to process all csv files in current directory
    • Grab several files or a single directory upon sticklog2heatmap.exe to process selectively
    Source code(tar.gz)
    Source code(zip)
    hid2sticklog.exe(5.40 MB)
    sticklog2heatmap.exe(68.48 MB)
Owner
A humble game developer who's into RC flying things.
hardware design of the 250mm drone

hardware design of the 250mm drone

ZJU FAST Lab 645 Dec 25, 2022
SPI driven CircuitPython driver for PCA9745B constant current LED driver.

Introduction THIS IS VERY MUCH ALPHA AND IN ACTIVE DEVELOPMENT. THINGS WILL BREAK! THIS MAY ALSO BREAK YOUR THINGS! SPI driven CircuitPython driver fo

Andrew Ferguson 1 Jan 14, 2022
Count the number of people around you 👨‍👨‍👦 by monitoring wifi signals 📡 .

howmanypeoplearearound Count the number of people around you 👨‍👨‍👦 by monitoring wifi signals 📡 . howmanypeoplearearound calculates the number of

Zack 6.7k Jan 07, 2023
MicroPython driver for 74HC595 shift registers

MicroPython 74HC595 A MicroPython library for 74HC595 8-bit shift registers. There's both an SPI version and a bit-bang version, each with a slightly

Mike Causer 17 Nov 29, 2022
gdsfactory is an EDA (electronics design automation) tool to Layout Integrated Circuits.

gdsfactory 3.5.5 gdsfactory is an EDA (electronics design automation) tool to Layout Integrated Circuits. It is build on top of phidl gdspy and klayou

147 Jan 04, 2023
Testing additional addon devices, and their working scripts

ESP32-addon-devices-potpurri Testing additional addon devices, and their micropython working scripts 📑 List of device addons tested so far Ethernet P

f-caro 0 Nov 26, 2022
Implemented robot inverse kinematics.

robot_inverse_kinematics Project setup # put the package in the workspace $ cd ~/catkin_ws/ $ catkin_make $ source devel/setup.bash Description In thi

Jianming Han 2 Dec 08, 2022
This OctoPrint plugin will make the initial connection to 3D Hub a breeze

3D Hub Connector This OctoPrint plugin will make the initial connection to 3D Hub a breeze. In future it will help in setting up a tunnel connection a

3D Hub 2 Aug 03, 2022
🌱 - WebhookHard◞ Fines Educativos ◟

v1.0.0 WebhookHardware ¿Que es WebhookHardware? WebhookHardware se trata de un proyecto tratado para sacar informacion sobre el hardware de tus victim

3 Jun 14, 2021
HA-Edge-Connector - HA Edge Connector For Python

HA-Edge-Connector 1. Required a. Smartthings Hub & Homeassistant must be in same

chals 21 Dec 29, 2022
A Fast, Easy, and User Friendly way to control Robotics Actuators.

T-Motor Controller A Fast, Easy, and User Friendly way to control Robotics Actuators. View Demo · Report Bug · Request Feature Table of Contents About

26 Aug 23, 2022
FERM: A Framework for Efficient Robotic Manipulation

Framework for Efficient Robotic Manipulation FERM is a framework that enables robots to learn tasks within an hour of real time training.

Ruihan (Philip) Zhao 111 Dec 31, 2022
Windhager myComfort custom component for Home Assistant

Windhager myComfort custom component for Home Assistant

5 Apr 27, 2022
A 3rd party Moonraker component to create timelapse of 3D prints.

A 3rd party Moonraker component to create timelapse of 3D prints.

Mainsail-Crew 166 Dec 26, 2022
An IoT Trivia app that shows you how to take a JSON web API such as the opentdb.com API and stream and display it on a FeatherS2 in an OLED display.

CircuitPython IoT Trivia ESP32-S2 OLED Version An IoT Trivia app that shows you how to take a JSON web API such as the opentdb.com API and stream and

Kevin Thomas 1 Nov 27, 2021
emhass: Energy Management for Home Assistant

emhass EMHASS: Energy Management for Home Assistant Context This module was conceived as an energy management optimization tool for residential electr

David 70 Dec 24, 2022
Home Assistant custom integration for Yi cameras: yi-hack-MStar, yi-hack-Allwinner and yi-hack-Allwinner-v2

yi-hack Home Assistant integration Overview yi-hack Home Assistant is a custom integration for Yi cameras (or Sonoff camera) with one of the following

roleo 131 Jan 03, 2023
Example code and projects for FeatherS2 and FeatherS2 Neo

FeatherS2 & FeatherS2 Neo This repo is a collection of code, firmware, and files

Unexpected Maker 5 Jan 01, 2023
Python script for printing to the Hanshow price-tag

This repository contains Python code for talking to the ATC_TLSR_Paper open-source firmware for the Hanshow e-paper pricetag. Installation # Clone the

12 Oct 06, 2022
Parametric open source reconstructions of Voron printed parts

The Parametric Voron This repository contains Fusion 360 reconstructions of various printed parts from the Voron printers

Matthew Lloyd 26 Dec 19, 2022