Weather Clock for Raspberry PI
This project is a dashboard for Raspberry Pi to display environmental weather data, rain radar, weather forecast, etc. on a connected LCD written in Python. The data is collected from local MQTT broker and also from Internet services.
Display
I used a 7inch IPS display with 1024x600 hardware resolution and HDMI input, which has a low power consumption of only 1-2 Watt which is predestinated for 24/7 operation. An RCWL-0516 doppler radar microwave motion sensor module is used to switch off the backlight when no motion has been detected for the last 10 minutes. This is for saving energy when nobody is in the room to watch the dashboard. The backlight is switched on automatically when motion is detected.
https://www.waveshare.com/wiki/7inch_HDMI_LCD
Raspberry PI
I use the Raspberry Pi Zero WH which has enough performance, a low power consumption and an HDMI connector. Also it is possible to connect it directly to the backside of the Waveshare display. Only a mini-HDMI (type C) to normal-HDMI (type A) cable is required. The whole system (RPI + display) can be powered over the USB connector and consumes in total a maximum of 4 Watt.
Software on the Raspberry PI
- Use a 16Gbyte SD card and install Raspberry Pi OS on it
- Configure graphics driver and resolution as described on https://www.waveshare.com/wiki/7inch_HDMI_LCD
- Configure a static IP within your WiFi network
- Activate SSH for remote configuration, SW update and maintainance
Install following packages used by the Python program:
- pip install python3-utils
- sudo apt-get install python3-pil python3-pil.imagetk
- sudo apt-get install python3-pip -y
- sudo pip3 install paho-mqtt
Weather Clock configuration
Please change following variables according to your location. The value for xmin and ymin can be determined with https://oms.wff.ch/calc.htm for a specific zoom level.
- longitude = "8.900"
- latiude = "48.800"
- timezone = "Europe/Berlin"
- zoom = 12
- xmin = 2148
- ymin = 1409
Please change following variables according to your MQTT settings:
- mqtt_user = "*********"
- mqtt_password = "***************"
- mqtt_broker_address = "192.168.xxx.xxx"
- mqtt_port = 1883
- mqtt_topic_pressure = "/483fdabaceba/pressure"
- mqtt_topic_outtemperature = "/483fdabaceba/temperature"
- mqtt_topic_outhumidity = "/483fdabaceba/humidity"
- mqtt_topic_intemperature = "/483fdabaceba/temperature"
- mqtt_topic_inhumidity = "/483fdabaceba/humidity"
Internet services used
- Tiles for the map background from Openstreetmap: e.g. https://tile.openstreetmap.org/12/2148/1409.png
- Rainviewer API: https://api.rainviewer.com/public/weather-maps.json
- Tiles for the rain radar as overlay from Rainviewer: e.g. https://tilecache.rainviewer.com/v2/radar/1636462800/256/12/2148/1409/2/1_1.png
- Actual weather and weather forecast from BrightSky (DWD open weaher data): e.g. https://api.brightsky.dev/weather?lat=48.80&lon=8.90&date=2021-10-18&tz=Europe/Berlin
The program
Execute the program with: python3 ./weatherclock_rpi.py
8 Oct 6, 2022
4 Jan 19, 2022
13 Jan 2, 2023
3 Apr 8, 2022
2 Dec 30, 2021
43 Nov 11, 2022
238 Jan 8, 2023
10 Dec 23, 2022
3 Apr 29, 2022
61 Dec 29, 2022
3.2k Dec 30, 2022
1 Nov 14, 2021
2 Jan 11, 2022
2 Nov 18, 2021
3 Jan 03, 2022
105 Oct 22, 2022
2 Dec 26, 2021
114 Dec 21, 2022
62 Oct 10, 2022
105 Jan 07, 2023
6 Nov 13, 2021
27 Nov 05, 2022
2 Dec 07, 2021
52 Oct 16, 2022
29 Nov 30, 2022
1 Aug 24, 2022
17 Dec 03, 2022
15 Dec 22, 2022
59 Dec 26, 2022
