Doughskript interpreter for converting simple command sequences into executable Arduino C++ code.

Related tags

Hardwareinterpreterhackingpython3
Overview

Kooky Bakerman by @Cumachelas

DON'T USE THE EXECUTABLE DISTRIBUTION YET! (testing purposes only)

Installation and use:

  1. Clone this repository
  2. Make sure to have the latest version of Python v3.x installed
  3. Run dep_install.py to get all the dependencies with pip (check logfile.txt for potential errors - better installer coming soon)
  4. Run Bakerman_GUI.py to convert DS files into executable Arduino code :-)

Use with Digispark (16MHz):

  1. Get the latest version of Arduino IDE (https://www.arduino.cc/en/software)
  2. Install the extended version of DigisparkKeyboard (https://github.com/ernesto-xload/DigisparkKeyboard)
  3. Install the Digistump drivers (https://github.com/digistump/DigistumpArduino/releases/download/1.6.7/Digistump.Drivers.zip)
  4. Add Digistump boards to your Arduino IDE: Preferences -> Additional Board URLs -> add http://digistump.com/package_digistump_index.json
  5. Select the correct board and the micronucleus programmer
  6. Upload the generated .ino file and THEN plug in your board (you will see a prompt from micronucleus)
  7. Have fun!

NOTE: When using dep_install.py, you will get a failed pip install of getch. This library isn't needed anymore and isn't an issue.

You might also like...
Turn your Raspberry Pi Pico into a USB Rubber Ducky
Turn your Raspberry Pi Pico into a USB Rubber Ducky

pico-ducky Turn your Raspberry Pi Pico into a USB Rubber Ducky Install Requirements CircuitPython for the Raspberry Pi Pico adafruit-circuitpython-bun

Konstantinos 5 Nov 8, 2022
Turns a compatible Raspberry Pi device into a smart USB drive for PS4/PS5.

PSBerry A WIP project for Raspberry Pi, which turns a compatible RPI device into a smart USB drive for PS4/PS5. Allows for save management of PS4 game

Filip Tomaszewski 2 Jan 15, 2022
A script that publishes power usage data of iDrac enabled servers to an MQTT broker for integration into automation and power monitoring systems

iDracPowerMonitorMQTT This script publishes iDrac power draw data for iDrac 6 enabled servers to an MQTT broker. This can be used to integrate the pow

Lucas Zanchetta 10 Oct 6, 2022
Transform a Raspberry Pi into a network diagnostic machine.
Transform a Raspberry Pi into a network diagnostic machine.

EtherView Last updated jan 30, 2022. Welcome to the EtherView project! This is a project to transform a RaspberryPi into a portable network diagnostic

null 1 Jan 30, 2022
Simple Python script to decode and verify an European Health Certificate QR-code

A simple Python script to decode and verify an European Health Certificate QR-code.

Mathias Panzenböck 61 Oct 5, 2022
Code and build instructions for Snap, a simple Raspberry Pi and LED machine to show you how expensive the electricyty is at the moment

Code and build instructions for Snap, a simple Raspberry Pi and LED machine to show you how expensive the electricyty is at the moment. On row of LEDs shows the cost of the hour, the other row the cost of the day.

Johan Jonk Stenström 3 Sep 8, 2022
Run this code to blink your ThinkPad LED with a hidden mysterious Morse code! ;)
Run this code to blink your ThinkPad LED with a hidden mysterious Morse code! ;)

TMorse Run this code to blink your ThinkPad LED with a hidden mysterious Morse code! ;) Compatible with python3.9+. No third-party library is required

Mahyar 2 Jul 11, 2022
A module for cross-platform control of the mouse and keyboard in python that is simple to install and use.

PyUserInput PyUserInput is a group project so we've moved the project over to a group organization: https://github.com/PyUserInput/PyUserInput . That

Paul Barton 1k Dec 27, 2022
This is a Virtual Keyboard which is simple yet effective to use.
This is a Virtual Keyboard which is simple yet effective to use.

Virtual-Keyboard This is a Virtual KeyBoard which can track finger movements and lets you type anywhere ranging from notepad to even web browsers. It

Jehan Patel 3 Oct 1, 2021
Releases(v1.0)

  • v1.0(Feb 8, 2022)

    FIRST FUNCTIONAL VERSION

    • made for DS v3 (nearly all features are implemented)
    • added dep_install.py for easier dependency installation
    • added a lot of failsafe features
    • ditched the CLI version
    Source code(tar.gz)
    Source code(zip)

  • v0.5(Jan 9, 2022)

    Latest v0.5 release - testing purposes.

    CHANGELOG:

    • Bugfixes
    • Logging implemented with the proper directory

    Full Changelog: https://github.com/Cumachelas/bakerman/commits/v0.5

    Source code(tar.gz)
    Source code(zip)
Owner
Svjatoslav
Svjatoslav
GitHub Repository
Drobo Status is a python program that will connect to your Drobo and return JSON data regarding your Drobo

This is a simple python script that will run a docker container to pull data from Drobo. It will give information like (Name, serial, firmware, disk-total, disk-used, disk-free and individual disk st

Biofects 1 Jan 15, 2022
This is the remake of the program PYOBD. It works on Python3 and all new libraries. It was tested on Linux, Windows, and it should work on MAC too.

This is the remake of the program PYOBD. It works on Python3 and all new libraries. It was tested on Linux, Windows, and it should work on MAC too. You just need an ELM327 USB or bluetooth device and

127 Jan 06, 2023
Example for Calculating Robot Dynamics Using Pinocchio Library

A Example for Calculating Robot Dynamics Using Pinocchio Library Developed by: Xinyang Tian. Platform: Linux + Pinocchio. In this work, i use Pinocchi

Rot_Tianers 33 Dec 28, 2022
Activate Numpad inside the touchpad with top right corner switch or F8 key

This is a python service which enables switching between numpad and touchpad for the Asus UX433. It may work for other models.

Mohamed Badaoui 230 Jan 08, 2023
Tools and documentation to aid in modifying the ADI ADALM Pluto firmware

Pluto firmware modifications This repository contains tools and documentation to aid in modifying the ADI ADALM Pluto firmware. Extraction of the Plut

Daniel Estévez 28 Dec 21, 2022
SPI driven CircuitPython driver for PCA9745B constant current LED driver.

Introduction THIS IS VERY MUCH ALPHA AND IN ACTIVE DEVELOPMENT. THINGS WILL BREAK! THIS MAY ALSO BREAK YOUR THINGS! SPI driven CircuitPython driver fo

Andrew Ferguson 1 Jan 14, 2022
A script and GUI for controlling stepper motors from an arduino

A script and GUI for controlling stepper motors from an arduino (nema 23 in my case but should work for others in general)

Pip 2 Aug 01, 2022
Raspberry Pi Pico support for VS Code

Pico-Go VS Code Extension Pico-Go provides code auto-completion and allows you to communicate with your Raspberry Pi Pico board using the built-in REP

Chris Wood 114 Dec 28, 2022
A Simple Python KeyLogger App

✨ Kurulum Uygulamayı bilgisayarınızda kullana bilmek için bazı işlemler yapmanız gerekiyor. Aşağıdaki yönlendirmeleri takip ederek bunu yapabilirsiniz

VorteX 7 Jun 11, 2022
Designed and coded a password manager in Python with Arduino integration

Designed and coded a password manager in Python with Arduino integration. The Program uses a master user to login, and stores account data such as usernames and passwords to the master user. While lo

Noah Colbourne 1 Jan 16, 2022
Home Assistant integration for energy consumption data from UK SMETS (Smart) meters using the Hildebrand Glow API.

Hildebrand Glow (DCC) Integration Home Assistant integration for energy consumption data from UK SMETS (Smart) meters using the Hildebrand Glow API. T

Aniket 153 Dec 30, 2022
Port of Uxn to digital hardware in the Logisim simulator

Uxn-Logisim Implements the Uxn instruction set in digital hardware. Very WIP. Contents cpu.circ - The Logisim file microcode.mc - Microcode source fil

DeltaF1 11 Mar 27, 2022
This Home Assistant custom component adds support for controlling Midea dehumidiferes on local network.

This is a custom component for Home assistant that adds support for Midea dehumidifier appliances via the local area network. midea-dehumidifier-lan H

Nenad Bogojevic 97 Jan 08, 2023
Imbalaced Classification and Robust Semantic Segmentation

Imbalaced Classification and Robust Semantic Segmentation This repo implements two algoritms. The imbalance clibration (IC) algorithm for image classi

24 Jul 23, 2022
Ingeniamotion is a library that works over ingenialink and aims to simplify the interaction with Ingenia's drives.

Ingeniamotion Ingeniamotion is a library that works over ingenialink and aims to simplify the interaction with Ingenia's drives. Requirements Python 3

Ingenia Motion Control 7 Dec 15, 2022
A rubiks cube timer using a distance sensor and a raspberry pi 4, and possibly the pi pico to reduce size and cost.

distance sensor cube timer A rubiks cube timer using a distance sensor and a raspberry pi 4, and possibly the pi pico to reduce size and cost. How to

3 Feb 21, 2022
emhass: Energy Management for Home Assistant

emhass EMHASS: Energy Management for Home Assistant Context This module was conceived as an energy management optimization tool for residential electr

David 70 Dec 24, 2022
MicroPython driver for 74HC595 shift registers

MicroPython 74HC595 A MicroPython library for 74HC595 8-bit shift registers. There's both an SPI version and a bit-bang version, each with a slightly

Mike Causer 17 Nov 29, 2022
Custom component for Home Assistant that integrates Candy/Haier Wi-Fi washing machines (also known as Simply-Fi).

Candy Home Assistant component Custom component for Home Assistant that integrates Candy/Haier Wi-Fi washing machines (also known as Simply-Fi). This

Olivér Falvai 61 Dec 29, 2022
Toy robot that traverses on a finite surface

Toy Robot Challenge - Release Notes November 12, 2021 New features Initialisation - Users can set the home position and heading of the robot. Position

Ze Fei Teo 0 Feb 03, 2022