USB Rubber Ducky with the Rasberry Pi pico microcontroller

Overview

pico-ducky

Install

Install and have your USB Rubber Ducky working in less than 5 minutes.

  1. Download CircuitPython for the Raspberry Pi Pico.

  2. Plug the device into a USB port. It will show up as a removable media device named RPI-RP2.

  3. Copy the downloaded .uf2 file to the root of the Pico (RPI-RP2). The device will reboot and after a second or so, it will reconnect as CIRCUITPY.

  4. Download adafruit-circuitpython-bundle-7.x-mpy-YYYYMMDD.zip here and extract it outside the device.

  5. Navigate to lib in the recently extracted folder and copy adafruit_hid to the lib folder in your Raspberry Pi Pico.

  6. Click here, press CTRL + S and save the file as code.py in the root of the Raspberry Pi Pico, overwriting the previous file.

  7. Find a script here or create your own one using Ducky Script and save it as payload.dd in the Pico.

  8. Be careful, if your device isn't in setup mode, the device will reboot and after half a second, the script will run.

Setup mode

To edit the payload, enter setup mode by connecting the pin 1 (GP0) to pin 3 (GND), this will stop the pico-ducky from injecting the payload in your own machine. The easiest way to so is by using a jumper wire between those pins.

USB enable/disable mode

If you need the pico-ducky to not show up as a USB mass storage device for stealth, follow these instructions.
Enter setup mode.
Copy boot.py to the root of the pico-ducky.
Copy your payload script to the pico-ducky.
Disconnect the pico from your host PC. Connect a jumper wire between pin 18 and pin 20. This will prevent the pico-ducky from showing up as a USB drive when plugged into the target computer.
Remove the jumper and reconnect to your PC to reprogram. The default mode is USB mass storage enabled.

Owner
AnOnYmOus001100
Trying to be anonymous. *Love #computers, #networks, #programming and #systems and more than that like to learn about technology.
AnOnYmOus001100
gdsfactory is an EDA (electronics design automation) tool to Layout Integrated Circuits.

gdsfactory 3.5.5 gdsfactory is an EDA (electronics design automation) tool to Layout Integrated Circuits. It is build on top of phidl gdspy and klayou

147 Jan 04, 2023
DIY split-flap display

The goal is to make a low-cost display that's easy to fabricate at home in small/single quantities (e.g. custom materials can be ordered from Ponoko or similar, and other hardware is generally availa

Scott Bezek 2.5k Jan 05, 2023
Turns a compatible Raspberry Pi device into a smart USB drive for PS4/PS5.

PSBerry A WIP project for Raspberry Pi, which turns a compatible RPI device into a smart USB drive for PS4/PS5. Allows for save management of PS4 game

Filip Tomaszewski 2 Jan 15, 2022
2021 Real Robot Challenge Phase2 attemp

Real_Robot_Challenge_Phase2_AE_attemp We(team name:thriftysnipe) are the first place winner of Phase1 in 2021 Real Robot Challenge. Please see this pa

Qiang Wang 2 Nov 15, 2021
Pure micropython ESP32 SPI driver for sdcard and screen at the same SPI bus

micropython-esp32-spi-sdcard-and-screen-driver Proof of concept of Pure micropython espidf SPI driver for sdcard with screen at the same SPI bus (exam

Thomas Favennec 7 Mar 14, 2022
This allows you to record keyboard and mouse input, and play it back using pynput.

Record and Play with Python! This allows you to record keyboard and mouse input, and play it back (with looping) using pynput. It allows for automatio

George Jensen 45 Jan 02, 2023
Hotplugger: Real USB Port Passthrough for VFIO/QEMU!

Hotplugger: Real USB Port Passthrough for VFIO/QEMU! Welcome to Hotplugger! This app, as the name might tell you, is a combination of some scripts (py

DARKGuy (Alemar) 66 Nov 24, 2022
Pi-hole with Inky pHAT ePaper display

Pi-hole with Inky pHAT ePaper display This is my Pi-hole with an ePaper display.

11 Sep 13, 2022
3D-printable hexagonal mirror array capable of reflecting sunlight into arbitrary patterns

3D-printable hexagonal mirror array capable of reflecting sunlight into arbitrary patterns

Ben Bartlett 2.3k Dec 30, 2022
Toy robot that traverses on a finite surface

Toy Robot Challenge - Release Notes November 12, 2021 New features Initialisation - Users can set the home position and heading of the robot. Position

Ze Fei Teo 0 Feb 03, 2022
Connect a TeslaMate instance to Home Assistant, using MQTT

TeslaBuddy Connect a TeslaMate instance to Home Assistant, using MQTT. It allows basic control of your Tesla vehicle via Home Assistant (currently, ju

4 May 23, 2022
This OctoPrint plugin will make the initial connection to 3D Hub a breeze

3D Hub Connector This OctoPrint plugin will make the initial connection to 3D Hub a breeze. In future it will help in setting up a tunnel connection a

3D Hub 2 Aug 03, 2022
Nordpool_diff custom integration for Home Assistant

nordpool_diff custom integration for Home Assistant Requires https://github.com/custom-components/nordpool Applies non-causal FIR differentiator1 to N

Joonas Pulakka 45 Dec 23, 2022
HACS gives you a powerful UI to handle downloads of all your custom needs.

HACS (Home Assistant Community Store) Manage (Install, track, upgrade) and discover custom elements for Home Assistant directly from the UI. What? HAC

HACS 3.2k Jan 04, 2023
A refreshed Python toolbox for building complex digital hardware

A refreshed Python toolbox for building complex digital hardware

nMigen 1k Jan 05, 2023
Turn your Raspberry Pi Pico into a USB Rubber Ducky

pico-ducky Turn your Raspberry Pi Pico into a USB Rubber Ducky Install Requirements CircuitPython for the Raspberry Pi Pico adafruit-circuitpython-bun

Konstantinos 5 Nov 08, 2022
Small Robot, with LIDAR and DepthCamera. Using ROS for Maping and Navigation

🤖 RoboCop 🤖 Small Robot, with LIDAR and DepthCamera. Using ROS for Maping and Navigation Made by Clemente Donoso, 📍 Chile 🇨🇱 RoboCop Lateral Fron

Clemente Donoso Krauss 2 Jan 04, 2022
A IC scan test interface for Arduino

ICSCAN_ARDUINO Prerequisites Python 3.6 or higher arduino uno or nano what is this It is a bitstream tranceiver to test IC chip It sends bitstream to

Nifty Chips Laboratory 0 Sep 15, 2022
Blender Camera Switcher

Blender Camera Switcher A simple camera switcher addon for blender. Useful when use reference image for camera. This addon will automatically fix the

Corgice 1 Jan 31, 2022
3d printable macropad

Pico Mpad A 3D printable macropad for automating frequently repeated actions. Hardware To build this project you need access to a 3d printer. The mode

Dmytro Panin 94 Jan 07, 2023