Python module for the qwiic serial control motor driver

Overview

Qwiic_SCMD_Py

follow on Twitter

Python module for the qwiic motor driver

This python package is a port of the existing SparkFun Serial Controlled Motor Driver Arduino Library

This package can be used in conjunction with the overall SparkFun qwiic Python Package

New to qwiic? Take a look at the entire SparkFun qwiic ecosystem.

Contents

Supported Platforms

The qwiic Python package current supports the following platforms:

Dependencies

This driver package depends on the qwiic I2C driver: Qwiic_I2C_Py

Documentation

The SparkFun qwiic SCMD module documentation is hosted at ReadTheDocs

Installation

PyPi Installation

This repository is hosted on PyPi as the sparkfun-qwiic-scmd package. On systems that support PyPi installation via pip, this library is installed using the following commands

For all users (note: the user must have sudo privileges):

sudo pip install sparkfun-qwiic-scmd

For the current user:

pip install sparkfun-qwiic-scmd

Local Installation

To install, make sure the setuptools package is installed on the system.

Direct installation at the command line:

python setup.py install

To build a package for use with pip:

python setup.py sdist

A package file is built and placed in a subdirectory called dist. This package file can be installed using pip.

cd dist
pip install sparkfun_qwiic_scmd-<version>.tar.gz
  

Example Use

TBD

SparkFun - Start Something

Owner
SparkFun Electronics
Building opensource widgets to make prototyping hardware easier since 2002.
SparkFun Electronics
CPU benchmark by calculating Pi, powered by Python3

cpu-benchmark Info: CPU benchmark by calculating Pi, powered by Python 3. Algorithm The program calculates pi with an accuracy of 10,000 decimal place

Alex Dedyura 20 Jan 03, 2023
CircuitPython Driver for Adafruit 24LC32 I2C EEPROM Breakout 32Kbit / 4 KB

Introduction CircuitPython driver for Adafruit 24LC32 I2C EEPROM Breakout Dependencies This driver depends on: Adafruit CircuitPython Bus Device Regis

foamyguy 0 Dec 20, 2021
Inykcal is a software written in python for selected E-Paper displays.

Inykcal is a software written in python for selected E-Paper displays. It converts these displays into useful information dashboards. It's open-source, free for personal use, fully modular and user-f

Ace 727 Jan 02, 2023
A python file which I wrote to allow the Dorna Robots API to draw an Image on a 3D plane

Dorna-Robotics-Internship Code In the directory "Code" is a python file which I wrote to allow the Dorna Robots API to draw an Image on a 3D plane. I

Stephen Otto 2 Dec 06, 2021
This repo uses a stereo camera and gray-code-based structured light to realize dense 3D reconstruction.

Structured-light-stereo This repo uses a stereo camera and gray-code-based structured light to realize dense 3D reconstruction. . How to use: STEP 1:

FEI 20 Dec 31, 2022
Python script: Enphase Envoy mqtt json for Home Assistant

A Python script that takes a real time stream from Enphase Envoy and publishes to a mqtt broker. This can then be used within Home Assistant or for other applications. The data updates at least once

29 Dec 27, 2022
An open source operating system designed primarily for the Raspberry Pi Pico, written entirely in MicroPython

PycOS An open source operating system designed primarily for the Raspberry Pi Pico, written entirely in MicroPython. "PycOS" is an combination of the

8 Oct 06, 2022
Quasi-static control of the centroid of quadruped robot

Quasi-static control of quadruped robot   This is a demo of the quasi-static controller for the centroid of the quadruped robot. The Quadratic Program

Junwen Cui 21 Dec 12, 2022
Custom component for MPC-HC for home-assistant

mpc_hc The current mpchc integration in homeassistant violates ADR0004, so it will be deleted from core. This is just the existing integration copied

3 Dec 15, 2022
Repo for the esp32s2 version of the Wi-Fi Nugget

Repo for the esp32s2 version of the Wi-Fi Nugget

HakCat 30 Nov 05, 2022
Python apps to assist with Gas Blending

Welcome to DiveTools Gas Blending This tool is for testing and educational use. It is not intended to confirm the mix of breathing gases. If this tool

Tucker 7 Sep 18, 2022
OctoPrint is the snappy web interface for your 3D printer!

OctoPrint OctoPrint provides a snappy web interface for controlling consumer 3D printers. It is Free Software and released under the GNU Affero Genera

OctoPrint 7.1k Jan 03, 2023
PBA: Pleco Breeding Assistant

A small monitor that reports the external, fishroom and water change parameters to have suitable water parameters and induce breeding. These two features already represent 50% of the "reproductive su

Mirko Mancin 1 Jan 19, 2022
Software framework to enable agile robotic assembly applications.

ConnTact Software framework to enable agile robotic assembly applications. (Connect + Tactile) Overview Installation Development of framework was done

Southwest Research Institute Robotics 29 Dec 01, 2022
Universal Xiaomi MIoT integration for Home Assistant

Xiaomi MIoT Raw 简体中文 | English MIoT 协议是小米智能家居从 2018 年起推行的智能设备通信协议规范,此后凡是可接入米家的设备均通过此协议进行通信。此插件按照 MIoT 协议规范与设备通信,实现对设备的状态读取及控制。

1.9k Jan 02, 2023
LifeSaver automatically, periodically saves USB flash drive data into the PC

LifeSaver automatically, periodically saves USB flash drive data into the PC. Theoriticaly it will work with any any connected drive ex - Hard Disk ,SSD ... But, can't handle Backing up multipatition

siddharth dhaka 4 Sep 26, 2021
Activate Numpad inside the touchpad with top right corner switch or F8 key

This is a python service which enables switching between numpad and touchpad for the Asus UX433. It may work for other models.

Mohamed Badaoui 230 Jan 08, 2023
Run this code to blink your ThinkPad LED with a hidden mysterious Morse code! ;)

TMorse Run this code to blink your ThinkPad LED with a hidden mysterious Morse code! ;) Compatible with python3.9+. No third-party library is required

Mahyar 2 Jul 11, 2022
The ABR Control library is a python package for the control and path planning of robotic arms in real or simulated environments.

The ABR Control library is a python package for the control and path planning of robotic arms in real or simulated environments. ABR Control provides API's for the Mujoco, CoppeliaSim (formerly known

Applied Brain Research 277 Jan 05, 2023
a fork of the OnionShare software better optimized for lower spec lightweight machines and ARM processors

OnionShare-Optimized A fork of the OnionShare software better optimized for lower spec lightweight machines and ARM processors such as Raspberry Pi or

ALTPORT 4 Aug 05, 2021