I made this so I can control my Tapo L510 light bulb and Govee H6159 light strip using the PyP100 module and the Govee public API

Overview

TAPO-And-Govee-Controller

I made this so I can control my Tapo L510 light bulb and Govee H6159 light strip using the PyP100 module and the Govee public API

How it works

A flask server is set up, the flask sever runs locally on the network on port 8000, your device is found by it's IP which you will need to find out what this is through the Tapo App then it creates a handshake between the device and the server, then the server tries to create a login to the device and the devices to allow communication. Then on the main url / the index.html file is rendered where a user can access buttons to carry out the functions. For example the turn on tapo light bulb button goes to url end point /on_tapo it will the function attached to the endpoint def on_tapo()

How to set up to use your devices

Check PyP100 compatability and the Govee API compatiblity when getting you govee API

  1. Clone repository
  2. Get IP address of tapo device and login information and swap it out in the main.py file under bulb =
  3. Get an API key from Govee, you can do this by getting the Govee App My Profile -> Settings -> About Us -> Apply for API Key
  4. Apply this in configs.py under def apiKey()
  5. Create a virtual environment by having vitualenv installed and run source venv/bin/activate in the main directory
  6. run python3 main.py or python main.py

Debugging

If when cloning the repositry and can't actiavte the virtual environment create a new one by running virtualenve and install the necessary modules:

requests

PyP100

  1. If devices have no power provided to them for example a bulb is turned off at the light switch the seerver will not power up, I cannot add a try and except statement as the PyP100 module throws an exception when it can't connect and the server does not start.

Errors not stated

Create an issue on the repository and I will try to fix it

Owner
James Westhead
James Westhead
DIY split-flap display

The goal is to make a low-cost display that's easy to fabricate at home in small/single quantities (e.g. custom materials can be ordered from Ponoko or similar, and other hardware is generally availa

Scott Bezek 2.5k Jan 05, 2023
A small Python app to converse between MQTT messages and 433MHz RF signals.

mqtt-rf-bridge A small Python app to converse between MQTT messages and 433MHz RF signals. This acts as a bridge between Paho MQTT and rpi-rf. Require

David Swarbrick 3 Jan 27, 2022
HACS gives you a powerful UI to handle downloads of all your custom needs.

HACS (Home Assistant Community Store) Manage (Install, track, upgrade) and discover custom elements for Home Assistant directly from the UI. What? HAC

HACS 3.2k Jan 04, 2023
Raspberry Pi Pico support for VS Code

Pico-Go VS Code Extension Pico-Go provides code auto-completion and allows you to communicate with your Raspberry Pi Pico board using the built-in REP

Chris Wood 114 Dec 28, 2022
Pi-hole with Inky pHAT ePaper display

Pi-hole with Inky pHAT ePaper display This is my Pi-hole with an ePaper display.

11 Sep 13, 2022
Sleep As Android integration for Home Assistant

Sleep As Android custom integration This integration will allow you to get events from your SleepAsAndroid application in a form of the sensor states

Igor 84 Dec 30, 2022
This is the remake of the program PYOBD. It works on Python3 and all new libraries. It was tested on Linux, Windows, and it should work on MAC too.

This is the remake of the program PYOBD. It works on Python3 and all new libraries. It was tested on Linux, Windows, and it should work on MAC too. You just need an ELM327 USB or bluetooth device and

127 Jan 06, 2023
A simple portable USB MIDI controller based on Raspberry-PI Pico and a 16-button keypad, written in Circuit Python

RPI-Pico-16-BTn-MIDI-Controller-using-CircuitPython A simple portable USB MIDI controller based on Raspberry-PI Pico, written in Circuit Python. Link

Rounak Dutta 3 Dec 04, 2022
An IoT Trivia app that shows you how to take a JSON web API such as the opentdb.com API and stream and display it on a FeatherS2 in an OLED display.

CircuitPython IoT Trivia ESP32-S2 OLED Version An IoT Trivia app that shows you how to take a JSON web API such as the opentdb.com API and stream and

Kevin Thomas 1 Nov 27, 2021
Home assiatant Custom component: Camera Archiver

Camera archiver Archive your ftp camera meadia files on other ftp with files renaming and event creation. Event can be used for send information to el

1 Jan 06, 2022
This application works with serial communication. Use a simple gui to send and receive serial data from arduino and control leds and motor direction

This application works with serial communication. Use a simple gui to send and receive serial data from arduino and control leds and motor direction

ThyagoKZKR 2 Jul 18, 2022
Software framework to enable agile robotic assembly applications.

ConnTact Software framework to enable agile robotic assembly applications. (Connect + Tactile) Overview Installation Development of framework was done

Southwest Research Institute Robotics 29 Dec 01, 2022
Home-Assistant MQTT bridge for Panasonic Comfort Cloud

Panasonic Comfort Cloud MQTT Bridge Home-Assistant MQTT bridge for Panasonic Comfort Cloud. Note: Currently this brige is a one evening prototype proj

Santtu Jรคrvi 2 Jan 04, 2023
The ABR Control library is a python package for the control and path planning of robotic arms in real or simulated environments.

The ABR Control library is a python package for the control and path planning of robotic arms in real or simulated environments. ABR Control provides API's for the Mujoco, CoppeliaSim (formerly known

Applied Brain Research 277 Jan 05, 2023
A IC scan test interface for Arduino

ICSCAN_ARDUINO Prerequisites Python 3.6 or higher arduino uno or nano what is this It is a bitstream tranceiver to test IC chip It sends bitstream to

Nifty Chips Laboratory 0 Sep 15, 2022
PyTorch implementation of paper "MT-ORL: Multi-Task Occlusion Relationship Learning" (ICCV 2021)

MT-ORL: Multi-Task Occlusion Relationship Learning Official implementation of paper "MT-ORL: Multi-Task Occlusion Relationship Learning" (ICCV 2021) P

Panhe Feng 12 Oct 11, 2022
MicroPython driver for 74HC595 shift registers

MicroPython 74HC595 A MicroPython library for 74HC595 8-bit shift registers. There's both an SPI version and a bit-bang version, each with a slightly

Mike Causer 17 Nov 29, 2022
Designed and coded a password manager in Python with Arduino integration

Designed and coded a password manager in Python with Arduino integration. The Program uses a master user to login, and stores account data such as usernames and passwords to the master user. While lo

Noah Colbourne 1 Jan 16, 2022
๐ŸŽƒ Some spooky code samples to hack yourself a pumpkin ๐Ÿ‘ป

๐ŸŽƒ Tech Or Treat ๐Ÿ‘ป It's spooky season for those who celebrate Halloween, and to get in the spirit (spirit - get it? ๐Ÿ‘ป ) we thought it would be fun t

Jim Bennett 5 Feb 07, 2022
Adafruit IO connected smart thermostat based on CircuitPython.

Adafruit IO Thermostat Adafruit IO connected smart thermostat based on CircuitPython. Background and Motivation I have a 24 V Heat-only system with a

Shubham Chaudhary 1 Jan 18, 2022