nastran-aero-flutter
This project is intended to analyse the Supersonic Panel Flutter using the NASTRAN software.
The project uses the pyNastran and the python scientific packeges (i.e scipy, numpy, matplotlib).
Currently, the focus is to use the aerodynamic Piston Theory, available on NASTRAN with the CAERO5 element. But it can be extended to use with any aerodynamic element.
This software is result of a research project of the Department of Mechanical Engineering at the Federal University of Minas Gerais (UFMG).
Use
An exemple of utilization is on the run_analysis.py script.
First it generates the plate structure and required properties.
import numpy as np
from nastran.structures.panel import LaminatedStructuralPlate
from nastran.structures.composite import OrthotropicMaterial
a, b = 100, 100
p1 = np.array([0, 0, 0])
p2 = p1 + np.array([a, 0, 0])
p3 = p1 + np.array([a, b, 0])
p4 = p1 + np.array([0, b, 0])
cfrp = OrthotropicMaterial(1, 54000., 18000., 0.3, 7200., 2.6e-9)
nchord, nspan = 10, 10
lam = LaminatedStructuralPlate.create_sawyer_plate(p1, p2, p3, p4, nspan, nchord, 1, 45, 6, 0.1, cfrp)
Then you can add the analysis properties for SOL 145 Aeroelastic Dynamic Flutter. The PanelFlutterPistonAnalysisModel class is a wrapper of the pyNastran's BDF class.
from nastran.aero.analysis.panel_flutter import PanelFlutterPistonAnalysisModel
config = {
'vref': 1000., # used to calculate the non-dimensional dynamic pressure must be the same in control case (mm/s in the case)
'ref_rho': 1.225e-12, # air density reference (ton/mm^3 in the case)
'ref_chord': 300., # reference chord (mm in the case)
'n_modes': 15, # number searched modes in modal analysis
'frequency_limits':
[.0, 3000.], # the range of frequency (Hz) in modal analysis
'method': 'PK', # the method for solving flutter (it will determine the next parameters
'densities_ratio': [.5], # rho/rho_ref -> 1/2 simulates the "one side flow" of the panel (? reference ?)
'machs': [3.5, 4.5, 5.5, 6.5], # Mach numbers
'alphas': [.0, .0, .0, .0], # AoA (°) -> 0 is more conservative (? reference ?)
'reduced_frequencies':
[.001, .01, .1, .2, .4, .8], # reduced frequencies (k) (check influence)
'velocities': # velocities (mm/s in the case)
np.linspace(10, 100, 10)*1000,
}
params = {
'VREF': 1000.0,
'COUPMASS': 1,
'LMODES': 20,
# 'POST': [-1]
}
analysis = PanelFlutterPistonAnalysisModel(lam.bdf, params=params)
analysis.set_global_case_from_dict(config)
You can add "super" panels, that is just a wrapper of CAEROx elements that make one element.
from nastran.aero.superpanels import SuperAeroPanel5
spanel_p = SuperAeroPanel5(1, p1, p2, p3, p4, nchord, nspan, theory='VANDYKE')
analysis.add_superpanel(spanel_p)
You can set multiple subcases for example varing the boundary conditions.
cases_labels = {
1: "Loaded edges SS & unloaded edges SS",
2: "Loaded edges SS & unloaded edges CP",
3: "Loaded edges SS & unloaded edges SS/CP",
}
spc_cases = {
1: ('123', '123', '123', '123'), # loaded edges SS, unloaded edges SS
2: ('123', '123', '123456', '123456'), # loaded edges SS, unloaded edges CP
3: ('123', '123', '123', '123456'), # loaded edges SS, unloaded edges SS/CP
}
for i, spcs in spc_cases.items():
spc_id = analysis.idutil.get_next_sid()
for comp, nds in zip(list(spcs), lam.limit_nodes()):
if comp == '':
continue
analysis.model.add_spc1(spc_id, comp, nds, comment=cases_labels[i])
sub_config = {
'LABEL': cases_labels[i],
'SPC': spc_id,
}
analysis.create_subcase_from_dict(PanelFlutterSubcase, i, sub_config)
Then you must write all cards to the BDF object and export the file.
analysis.write_cards()
analysis.model.write_bdf('pflutter.bdf', enddata=True)
Then you can run the analysis and post-processes.
Outputs
The postprocessing generates DataFrames objects from the .f06 result files.
from nastran.aero.post import read_f06, get_critical_roots, plot_vf_vg
df = read_f06("pflutter.f06")
critic_df = get_critical_roots(df)
fig = plot_vf_vg(df.xs((1,3.5))) # Subcase, Mach
fig.show()
And Plots
49 Dec 22, 2022
12 Dec 25, 2021
22 Jul 20, 2022
19 Jan 1, 2023
1 Nov 9, 2021
2 Oct 22, 2021
1 Apr 18, 2022
49 Dec 11, 2022
3 Oct 25, 2022
20 Aug 06, 2022
1 Dec 31, 2021
6 Aug 22, 2022
2 Oct 24, 2021
1 Oct 08, 2022
2 Apr 15, 2022
10 Jun 30, 2022
2 Nov 18, 2021
1 Feb 13, 2022
1 Aug 09, 2022
2 Jan 19, 2022
1 Nov 24, 2021
1 Dec 27, 2021
20 Dec 16, 2022
3 Dec 02, 2022
9 Aug 12, 2022
3 Oct 14, 2022
8 Nov 07, 2021
1 Jun 10, 2022
2 Jan 05, 2022