A collection of examples of using cocotb for functional verification of VHDL designs with GHDL.

Overview

The original repository is now located on my own git-server at https://git.goodcleanfun.de/tmeissner/cocotb_with_ghdl It is mirrored to github with every push, so both should be in sync.

cocotb_with_ghdl

At the moment, this repo is in an early state and serves as a learning tool for me. So it contains a a lot of quirks and code which can be done much better by cocotb-professionals.

A collection of examples of using cocotb for functional verification of VHDL designs with GHDL.

This is a project with the purpose to learn using cocotb with GHDL. It is intended for my simple (and more complex in future) experiments with using the Python language instead of VHDL or SV to verify digital designs.

It is recommended to use an up-to-date version of GHDL as potential bugs are fixed very quickly. You can build GHDL from source or use one of the Docker images of the hdl containers project (recommended). For example the hdlc/sim:scipy docker image. This image contains a recent version of cocotb and a C++ compiler (needed to build some wheels during installing requirements with pip).

Have fun!

Quickstart guide

Change into docker container & install requirements

$ git clone https://git.goodcleanfun.de/tmeissner/cocotb_with_ghdl.git
$ cd cocotb_with_ghdl
$ ./env-setup.sh
$ docker run --rm -ti --volume=$(pwd):/build -e DISPLAY=$DISPLAY \
  --volume /tmp/.X11-unix:/tmp/.X11-unix hdlc/sim:scipy /bin/bash
$ ./docker-setup.sh
Collecting cocotb-bus
  Downloading cocotb-bus-0.2.1.tar.gz (28 kB)
  Installing build dependencies ... done
  Getting requirements to build wheel ... done
    Preparing wheel metadata ... done
...
Successfully built cocotb-bus wavedrom python-constraint
Installing collected packages: lxml, cocotb-bus, toposort, svgwrite, pyyaml, pyucis, python-constraint, pyboolector, cocotbext-axi, attrdict, wavedrom, pyvsc, pyuvm, cocotbext-uart, cocotbext-spi, cocotbext-pcie, cocotbext-eth, cocotb-coverage
Successfully installed attrdict-2.0.1 cocotb-bus-0.2.1 cocotb-coverage-1.1.0 cocotbext-axi-0.1.18 cocotbext-eth-0.1.18 cocotbext-pcie-0.1.20 cocotbext-spi-0.1.2 cocotbext-uart-0.1.2 lxml-4.7.1 pyboolector-3.2.2.20220125.14 python-constraint-1.4.0 pyucis-0.0.5.20211020.1 pyuvm-2.6.1 pyvsc-0.6.7.1792877175 pyyaml-6.0 svgwrite-1.4.1 toposort-1.7 wavedrom-2.0.3.post2

Run default test (UART TX)

[email protected]:~# cd /build/tests/
[email protected]:/build/tests# make
make -f Makefile results/uarttx.xml
make[1]: Entering directory '/build/tests'
mkdir -p results
mkdir -p work
/usr/local/bin/ghdl -i  --std=08 --workdir=work --work=libvhdl ../libvhdl/common/UtilsP.vhd      &&  \
/usr/local/bin/ghdl -i  --std=08 --workdir=work --work=work ../libvhdl/syn/*.vhd && \
/usr/local/bin/ghdl -m  --std=08 --workdir=work -Pwork --work=work uarttx
analyze ../libvhdl/common/UtilsP.vhd
analyze ../libvhdl/syn/UartTx.vhd
elaborate uarttx
MODULE=tb_uart TESTCASE=test_uarttx TOPLEVEL=uarttx TOPLEVEL_LANG=vhdl \
 /usr/local/bin/ghdl -r  --workdir=work -Pwork --work=work uarttx --vpi=/usr/local/lib/python3.9/dist-packages/cocotb/libs/libcocotbvpi_ghdl.so --wave=results/uarttx.ghw --psl-report=results/uarttx_psl.json --vpi-trace=results/uarttx_vpi.log
loading VPI module '/usr/local/lib/python3.9/dist-packages/cocotb/libs/libcocotbvpi_ghdl.so'
     -.--ns INFO     cocotb.gpi                         ..mbed/gpi_embed.cpp:76   in set_program_name_in_venv        Did not detect Python virtual environment. Using system-wide Python interpreter
     -.--ns INFO     cocotb.gpi                         ../gpi/GpiCommon.cpp:99   in gpi_print_registered_impl       VPI registered
VPI module loaded!
     0.00ns INFO     Running on GHDL version 2.0.0-dev (v1.0.0-974-g0e46300c) [Dunoon edition]
     0.00ns INFO     Running tests with cocotb v1.7.0.dev0 from /usr/local/lib/python3.9/dist-packages/cocotb
     0.00ns INFO     Seeding Python random module with 1644236947
/usr/local/lib/python3.9/dist-packages/attrdict/mapping.py:4: DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated since Python 3.3, and in 3.10 it will stop working
  from collections import Mapping
/usr/local/lib/python3.9/dist-packages/attrdict/mixins.py:5: DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated since Python 3.3, and in 3.10 it will stop working
  from collections import Mapping, MutableMapping, Sequence
     0.00ns INFO     Found test tb_uart.test_uarttx
     0.00ns INFO     running test_uarttx (1/1)
                       First simple test
     0.00ns INFO     Valid-accept driver
     0.00ns INFO       cocotbext-vai version 0.0.1
     0.00ns INFO       Copyright (c) 2022 Torsten Meissner
     0.00ns INFO     UART receiver
     0.00ns INFO       cocotbext-uart version 0.0.1
     0.00ns INFO       Copyright (c) 2022 Torsten Meissner
     0.00ns INFO     Hold reset
   100.00ns INFO     Released reset
   110.00ns INFO     Sending data:  0xaf
  1170.00ns INFO     Received data: 0xaf
  1190.00ns INFO     Sending data:  0x56
  2280.00ns INFO     Received data: 0x56
  2300.00ns INFO     Sending data:  0xb1
  3390.00ns INFO     Received data: 0xb1
  3410.00ns INFO     Sending data:  0x80
  4500.00ns INFO     Received data: 0x80
  4520.00ns INFO     Sending data:  0xc4
  5610.00ns INFO     Received data: 0xc4
  5630.00ns INFO     Sending data:  0x8
  6720.00ns INFO     Received data: 0x8
  6740.00ns INFO     Sending data:  0x68
  7830.00ns INFO     Received data: 0x68
  7850.00ns INFO     Sending data:  0x30
  8940.00ns INFO     Received data: 0x30
  8960.00ns INFO     Sending data:  0xa2
 10050.00ns INFO     Received data: 0xa2
 10070.00ns INFO     Sending data:  0x70
 11160.00ns INFO     Received data: 0x70
 11160.00ns INFO     test_uarttx passed
 11160.00ns INFO     **************************************************************************************
                     ** TEST                          STATUS  SIM TIME (ns)  REAL TIME (s)  RATIO (ns/s) **
                     **************************************************************************************
                     ** tb_uart.test_uarttx            PASS       11160.00           0.23      48943.29  **
                     **************************************************************************************
                     ** TESTS=1 PASS=1 FAIL=0 SKIP=0              11160.00           0.31      35939.72  **
                     **************************************************************************************

make[1]: Leaving directory '/build/tests

Available Tests

UART

Simple tests of UART transmitter & receiver of the libvhdl project

  • make DUT=uarttx or make
  • make DUT=uartrx

Wishbone

Simple tests of Wishbone slave of the libvhdl project

  • make DUT=wishbone
Owner
T. Meissner
FPGA-Engineer doing design and verification using VHDL, SystemVerilog, SVA and PSL.
T. Meissner
WinBoost: Boost your windows system.

Winboost runs a complete checkup of your entire system locating junk files, speed-reducing issues and causes of any system or application glitches or crashes. Through a lot of research and testing, w

Smit Parmar 4 Oct 01, 2021
A log likelihood fit for extracting neutrino oscillation parameters

A-log-likelihood-fit-for-extracting-neutrino-oscillation-parameters Minimised the negative log-likelihood fit to extract neutrino oscillation paramete

Vid Homsak 1 Jan 23, 2022
Mnemosyne: efficient learning with powerful digital flash-cards.

Mnemosyne: Optimized Flashcards and Research Project Mnemosyne is: a free, open-source, spaced-repetition flashcard program that helps you learn as ef

359 Dec 24, 2022
LINUX-AOS (Automatic Optimization System)

LINUX-AOS (Automatic Optimization System)

1 Jul 12, 2022
Up to date simple useragent faker with real world database

fake-useragent info: Up to date simple useragent faker with real world database Features grabs up to date useragent from useragentstring.com randomize

Victor K. 2.9k Jan 04, 2023
A deployer and package manager for OceanBase open-source software.

OceanBase Deploy OceanBase Deploy (简称 OBD)是 OceanBase 开源软件的安装部署工具。OBD 同时也是包管理器,可以用来管理 OceanBase 所有的开源软件。本文介绍如何安装 OBD、使用 OBD 和 OBD 的命令。 安装 OBD 您可以使用以下方

OceanBase 59 Dec 27, 2022
Manipulation OpenAI Gym environments to simulate robots at the STARS lab

liegroups Python implementation of SO2, SE2, SO3, and SE3 matrix Lie groups using numpy or PyTorch. [Documentation] Installation To install, cd into t

STARS Laboratory 259 Dec 11, 2022
An electron application to check battery of bluetooth devices connected to linux devices.

bluetooth-battery-electron An electron application to check battery of bluetooth devices connected to linux devices. This project provides an electron

Vasu Sharma 15 Dec 03, 2022
A calculator developed in Python.

Calculadora Uma simples calculadora... ( + − × ÷ ) 💻 Situação do projeto: Projeto finalizado ✔️ 🛠 Tecnologias: Python Tkinter (GUI) ⚙️ Pré-requisito

Arthur V.B.S. 1 Jan 27, 2022
Pre-1.0 door/chest sound injector for Minecraft

doorjector Pre-1.0 door/chest sound injector for Minecraft. While the game is running, doorjector hotswaps the new sounds for the old right before the

Sam 1 Nov 20, 2021
NExT-Ford-aula4 - NExT Ford aula4

Questão 1: vocês deveram fazer o passo a passo de como ficará as pilhas(Stack) e

Gerson 1 Jan 06, 2022
A python script that will automate the boring task of login to the captive portal again and again

A python script that will automate the boring task of login to the captive portal again and again

Rakib Hasan 2 Feb 09, 2022
pythonOS: An operating system kernel made in python and assembly

pythonOS An operating system kernel made in python and assembly Wait what? It uses a custom compiler called snek that implements a part of python3.9 (

Abbix 69 Dec 23, 2022
It's an .exe file that can notify your chia profit and warning message every time automatically.

chia-Notify-with-Line 警示程式 It's an .exe file that can notify your chia profit and warning message every time automatically. 這是我自行設計的小程式,有轉成.exe檔了,可以在沒

You,Yu 1 Oct 28, 2021
Function Plotter✨

Function-Plotter Build With : Python PyQt5 unittest matplotlib Getting Started This is an list of needed instructions to set up your project locally,

Ahmed Lotfy 3 Jan 06, 2022
The code submitted for the Analytics Vidhya Jobathon - February 2022

Introduction On February 11th, 2022, Analytics Vidhya conducted a 3-day hackathon in data science. The top candidates had the chance to be selected by

11 Nov 21, 2022
Python with the scientific stack, compiled to WebAssembly.

Pyodide may be used in any context where you want to run Python inside a web browser.

9.5k Jan 09, 2023
In this project, we'll be creating a virtual personal assistant for ourselves using our favorite programming language

In this project, we'll be creating a virtual personal assistant for ourselves using our favorite programming language, Python. We can perform several offline as well as online operations using the bo

Ashutosh Krishna 188 Jan 03, 2023
Back-end API for the reternal framework

RE:TERNAL RE:TERNAL is a centralised purple team simulation platform. Reternal uses agents installed on a simulation network to execute various known

Joey Dreijer 7 Apr 15, 2022
This is a simple SV calling package for diploid assemblies.

dipdiff This is a simple SV calling package for diploid assemblies. It uses a modified version of svim-asm. The package includes its own version minim

Mikhail Kolmogorov 11 Jan 05, 2023