FPGA based USB 2.0 high speed audio interface featuring multiple optical ADAT inputs and outputs

Overview

ADAT USB Audio Interface

FPGA based USB 2.0 High Speed audio interface featuring multiple optical ADAT inputs and outputs

Status / current limitations

  • enumerates as class compliant audio device on Linux and Linux. 2 and 8 channel modes.
  • audio output works almost glitch free. Occasional underruns occur, but they are barely audible.
  • only 48kHz sample rate supported
  • audio input is still a dummy (internally generated signal)
  • integrated USB2 high speed logic analyzer works
Comments
  • Board exceeds JLCPCB capabilities

    Board exceeds JLCPCB capabilities

    Got this message from JLCPCB and they cancelled my order:

    "After marking the hole compensation of the original 0.4/0.6 mm, the minimum hole distance is only about 0.17 mm, and the minimum hole distance line is only about 0.08, which exceeds our capabilities. (the minimum hole distance of different networks must be greater than 0.33 mm , the hole distance line must be greater than 0.23 mm)"

    I did notice that the visa and tracks were awfully close to each other, but i figured you had submitted this to JLCPCB before so i didnโ€™t think it was an issue.

    Iโ€™d do this myself, but modifying this design to fix this issue messes with it far more than I am comfortable with.

    the full list of capabilities can be found here: https://jlcpcb.com/capabilities/Capabilities

    opened by nikitalita 32
  • Add a full-speed target

    Add a full-speed target

    Thanks for posting this repo! I had some success with it on the TinyFPGA-Bx using the DirectUSB resource.

    This target enumerates correctly and the dummy tone shows up on record (a tad off-key and with a few artefacts)

    opened by BrettRD 15
  • final fixes

    final fixes

    I added back the custom rules and changed them so that:

    1. the custom rules that duplicated global rules were commented out
    2. the minimum clearance rule for the inner layers has been changed so it doesn't apply to zones, so it won't have the same copper fill bug that it did before

    The custom rules catch stuff that the global rules don't, but fortunately, we didn't have anything to fix here.

    I also length matched the D- and D+ lines by making D- and D+ both use vias to cross each other; I also adjusted the spacking and width of the tracks of the main run based on this calculation from eeweb: image

    With this, I think we're finally finished with this revision ๐Ÿฅณ

    opened by nikitalita 11
  • USB interface

    USB interface

    Hello, I like this project and would like to reproduce it with qmtech spartan 6 board. Can I use USB3300 for USB interface or is there some special feature of 3320 being used?

    If so, don't you happen to have one extra unpopulated PCB to sell?

    Thank you.

    opened by danielkucera 10
  • Fix PCB issues

    Fix PCB issues

    I ran into some issues when ordering the PCB from JLCPCB, so I had to make some minor adjustments:

    1. Changed the footprint for the toslink ports to the T8 variation vs. the T10. I can't find the PLR135/T10 part anywhere, and JLCPCB only had the T8. The only difference is the addition of two NPTH for the plastic mounting feet, so either the T10 or T8 variations can be used.

    2. Fix the USB-C port rotation for the POS file; it is flipped 180 degrees in the JLCPCB render

    3. Move power traces away from board edge The JLCPCB capabilities section says that traces must be >=.2mm from the edge: image

    So I just moved the power traces about .1mm; the only thing that it might cause issue with is that they're closer to the shield PTHs, but they still have about .4mm clearance to copper.

    1. Adjusted the board width for TOSLINK port clearance so that it can be flush with the case.

    BTW, you may want to update your JLCPCB plugin, I note that the part assignments file was in a different format.

    opened by nikitalita 9
  • S/PDIF support?

    S/PDIF support?

    I realize that S/PDIF is a different protocol and may take some effort to work because of variable clock speeds, but is this something that you are thinking about implementing in the future?

    opened by nikitalita 7
  • Port to LUNA board

    Port to LUNA board

    Would it be possible to port this to the LUNA board?

    The 8 in and out optical ports should fit comfortably on one of the two available PMOD connectors (though power draw may become an issue), and the two DACs on the other.

    question 
    opened by icb- 2
  • fix diff pair run on both top and bottom USB interfaces

    fix diff pair run on both top and bottom USB interfaces

    Applied the length matching to both the top AND bottom interfaces, fixed the main run according to these impedence calculations (because .09mm spacing was a bit too tight for comfort): image

    opened by nikitalita 2
  • Add JLCPCB custom rules

    Add JLCPCB custom rules

    I finally found a custom ruleset that has the JLCPCB rules here: https://gist.github.com/denniskupec/e163d13b0a64c2044bd259f64659485e

    I added that to the custom rules on the project and I adjusted the values to match. This should be all of their minimums. I also removed some bogus rules (like trace to vcut, since we aren't panelizing this, and maximum PTH size, which produced incorrect results).

    There are about 149 errors left now, but about 1/4 of them are just some ground vias having too small an annular ring (0.1250 vs. 0.13), and a good chunk of them are just here: image

    opened by nikitalita 2
  • Added an optional convolver as dsp for the dac1 output.

    Added an optional convolver as dsp for the dac1 output.

    The convolver can be enabled with the USE_CONVOLUTION flag. Once the design has been synthesized with USE_CONVOLUTION enabled you can enable the convolver by either pressing the first platform button or via the TOGGLE_CONVOLUTION (1) vendor usb control request.

    The concolver uses the amlib.dsp.convolution.mac convolver for now. In the future an option to use FFT convolution may be added.

    opened by fritzbauer 1
Releases(v0.0.8)
Owner
Hans Baier
Hans Baier
Sequencer: Deep LSTM for Image Classification

Sequencer: Deep LSTM for Image Classification Created by Yuki Tatsunami Masato Taki This repository contains implementation for Sequencer. Abstract In

Yuki Tatsunami 111 Dec 16, 2022
Converting UGG files from Rode Wireless Go II transmitters (unsompressed recordings) to WAV format

Rode_WirelessGoII_UGG2wav Converting UGG files from Rode Wireless Go II transmitters (uncompressed recordings) to WAV format Story I backuped the .ugg

Jรกn Mazanec 31 Dec 22, 2022
Anaphones are like anagrams, but for sounds.

Anaphones Anaphones are like anagrams but for sounds (phonemes). Examples include: salami-awesomely, atari-tiara, and beefy-phoebe. Anaphones can be a

James Murphy 18 Nov 02, 2022
Music Streaming Platform based on full implementation of DBSM

Symphony Music Streaming Platform based on full implementation of DBSM List of Commands Insert User (INSERT) Function to implement input in USER Get a

Parth Maradia 1 Nov 12, 2021
Code for paper 'Audio-Driven Emotional Video Portraits'.

Audio-Driven Emotional Video Portraits [CVPR2021] Xinya Ji, Zhou Hang, Kaisiyuan Wang, Wayne Wu, Chen Change Loy, Xun Cao, Feng Xu [Project] [Paper] G

197 Dec 31, 2022
DeepMusic is an easy to use Spotify like app to manage and listen to your favorites musics.

DeepMusic is an easy to use Spotify like app to manage and listen to your favorites musics. Technically, this project is an Android Client and its ent

Labrak Yanis 1 Jul 12, 2021
This is a python package that turns any images into MIDI files that views the same as them

image_to_midi This is a python package that turns any images into MIDI files that views the same as them. This package firstly convert the image to AS

Rainbow Dreamer 4 Mar 10, 2022
Spotify Song Recommendation Program

Spotify-Song-Recommendation-Program Made by Esra Nur ร–zรผm Written in Python The aim of this project was to build a recommendation system that recommen

esra nur รถzรผm 1 Jun 30, 2022
Anki vector Music โค is the best and only Telegram VC player with playlists, Multi Playback, Channel play and more

Anki Vector Music ๐ŸŽต A bot that can play music on Telegram Group and Channel Voice Chats Available on telegram as @Anki Vector Music Features ๐Ÿ”ฅ Thumb

Damantha Jasinghe 12 Nov 12, 2022
python wrapper for rubberband

pyrubberband A python wrapper for rubberband. For now, this just provides lightweight wrappers for pitch-shifting and time-stretching. All processing

Brian McFee 106 Nov 28, 2022
Supysonic is a Python implementation of the Subsonic server API.

Supysonic Supysonic is a Python implementation of the Subsonic server API. Current supported features are: browsing (by folders or tags) streaming of

Alban 228 Nov 19, 2022
Muzic: Music Understanding and Generation with Artificial Intelligence

Muzic is a research project on AI music that empowers music understanding and generation with deep learning and artificial intelligence.

Microsoft 2.6k Dec 30, 2022
ianZiPu is a way to write notation for Guqin (ๅค็ด) music.

PyBetween Wrapper for Between - ๋น„ํŠธ์œˆ์„ ์œ„ํ•œ ํŒŒ์ด์ฌ ๋ผ์ด๋ธŒ๋Ÿฌ๋ฆฌ Legal Disclaimer ์˜ค์ง ๊ต์œก์  ๋ชฉ์ ์œผ๋กœ๋งŒ ์‚ฌ์šฉํ• ์ˆ˜ ์žˆ์œผ๋ฉฐ, ๋น„ํŠธ์œˆ์€ VCNC์˜ ์ž์‚ฐ์ž…๋‹ˆ๋‹ค. ์•…์˜์  ๊ณต๊ฒฉ์— ์ด์šฉํ• ์‹œ ์ฒ˜๋ฒŒ ๋ฐ›์„์ˆ˜ ์žˆ์Šต๋‹ˆ๋‹ค. ์‚ฌ์šฉ์— ๋”ฐ๋ฅธ ์ฑ…์ž„์€ ์‚ฌ์šฉ์ž๊ฐ€

Nancy Yi Liang 8 Nov 25, 2022
GNU Radio โ€“ the Free and Open Software Radio Ecosystem

GNU Radio is a free & open-source software development toolkit that provides signal processing blocks to implement software radios. It can be used wit

GNU Radio 4.1k Jan 06, 2023
Simple, hackable offline speech to text - using the VOSK-API.

Nerd Dictation Offline Speech to Text for Desktop Linux. This is a utility that provides simple access speech to text for using in Linux without being

Campbell Barton 844 Jan 07, 2023
Play any song directly into your group voice chat.

Telegram VCPlayer Bot Play any song directly into your group voice chat. Official Bot : VCPlayerBot | Discussion Group : VoiceChat Music Player Suppor

Shubham Kumar 50 Nov 21, 2022
This is a realtime voice translator program which gets input from user at any language and converts it to the desired language that the user asks

This is a realtime voice translator program which gets input from user at any language and converts it to the desired language that the user asks ...

Mohan Ram S 1 Dec 30, 2021
Frescobaldi LilyPond Editor

README for Frescobaldi Homepage: http://www.frescobaldi.org/ Main author: Wilbert Berendsen Frescobaldi is a LilyPond sheet music text editor. It aims

Frescobaldi 600 Dec 29, 2022
The official repository for Audio ALBERT

AALBERT Here is also the official repository of AALBERT, which is Pytorch lightning reimplementation of the paper, Audio ALBERT: A Lite Bert for Self-

pohan 55 Dec 11, 2022
pyo is a Python module written in C to help digital signal processing script creation.

pyo is a Python module written in C to help digital signal processing script creation.

Olivier Bรฉlanger 1.1k Jan 01, 2023