Apple Store Stock Notifier monitors the availability of selected Apple devices in selected Apple stores, and sends you a notification when devices are available!

Overview

Apple Store Stock Notifier

This software will immediately send you a notification via Telegram when one of your coveted Apple Devices is available in the selected Apple Stores! In addition, it offers various tools (such as graphs) to analyze the availability of the selected devices from the comfort of your smartphone / tablet / teapot / desktop etc. (whatever Telegram runs on). It is intended to run on an always-on device (such as a Raspberry Pi), and requires an internet connection and a Telegram account.

This software is built on a modified version of Apple-Store-Reserve-Monitor by insanoid.

Installation

How to install

  1. Clone this repository and cd to it.
  2. Execute pip install -r requirements.txt.
  3. Adapt the config.json file to your needs (see under "use").
  4. Create a Telegram bot to inform you and enter the required details in parameters.py.
  5. Run the monitor with python monitor.py.
  6. (optional) Send /setcommands to the Telegram Botfather chat, select the bot and send the output under "Commands available:" to make the commands easily accessible from the chat.

Running the pip numpy on the Raspberry Pi can be cumbersome. If you get errors pertaining to "Importing the numpy C-extensions failed", try running sudo apt-get install python-dev libatlas-base-dev.

Use

It's as simple as entering the device and Apple Store you want in config.json and running python module.py. The model in config.json is the model part number, that can be looked up here. The store in config.json is the store ID, a list of which can be looked up here, defaults to all stores in the zip-code region. config.json is part of the interface of Apple Store Reserve Monitor, more information on how to use this here.

You can change the parameters regarding intervals, paths, use of proxies etc. from the defaults in parameters.py.

It is recommended to run this on a computer that is always on and always has an active internet connection (think of the environment when doing this!). Raspberry Pi and similar computing boards are often good choices. You may want to set up a job to start this automatically using crontab or bashrc if you are running this on a Raspberry Pi, so it can run autonomously.

Please use this software responsibly! Do not set a low polling interval, both for your own benefit (you will be blocked) as for the other users of Apple's service. In general, the defaults set are fine for being notified in time. The intended use is for people to be able to get an Apple device that is often out of stock for their own use. Do not use this software for scalping, price gouging or any other use that is unethical.

Proxies

Randomized proxies help you make requests for a prolonged period of time without your IP-address being blocked by Apple's server. For this http-request-randomizer by pgaref (licensed under MIT license) is used. If randomized proxies are enabled in parameters.py, a list of free proxies will be generated. When a request is made, a random proxy is selected from this list. If the proxy does not return a response within the timeout window, the proxy is removed from the list. Because free proxies are often slow and unreliable, for each request, it will fallback to a non-proxied request after attempting a proxy unsuccesfully. However, because unresponsive proxies are removed from the list, in most cases this random proxy system becomes reliable after a while. Keep in mind that free proxies only remain active for a very short time (days or even hours), so if this program is ran for a long time, the list will become empty, at which point it reloads the proxy list. Using the randomized proxies is significantly slower than direct requests, but prevent your IP address from being blocked.

Licensing

This software builts on other open source software. As such, it is MIT licensed.

You might also like...
Typhon is a macOS specific payload aimed at targetting Jamf managed devices.
Typhon is a macOS specific payload aimed at targetting Jamf managed devices.

Typhon is a macOS specific payload aimed at targetting Jamf managed devices. This payload can be used to manipulate macOS devices into communicating with a Mythic instance, which acts as a Jamf server with the ability to execute commands.

Home Assistant integration for MyEnergi devices
Home Assistant integration for MyEnergi devices

myenergi for Home Assistant myenergi custom component for Home Assistant This is a very early release, will add more documentations soon! This compone

Mini SCADA. Poll modbus devices by TCP/IP network.

Plans Add saving and loading devices and channels with files or db or someone else. Multitasking system for poll all devices Automatic optimization po

An API for controlling Wi-Fi connections on Balena devices.

Description An API for controlling Wi-Fi connections on Balena devices. It does not contain an interface, instead it provides API endpoints to send re

Python module to interface with Tuya WiFi smart devices

TinyTuya Python module to interface with Tuya WiFi smart devices Description This python module controls and monitors Tuya compatible WiFi Smart Devic

This application aims to read all wifi passwords and visualizes the  complexity in graph formation by taking into account several criteria and help you generate new random passwords.
This application aims to read all wifi passwords and visualizes the complexity in graph formation by taking into account several criteria and help you generate new random passwords.

This application aims to read all wifi passwords and visualizes the complexity in graph formation by taking into account several criteria and help you generate new random passwords.

IPE is a simple tool for analyzing IP addresses. With IPE you can find out the server region, city, country, longitude and latitude and much more in seconds.

IPE is a simple tool for analyzing IP addresses. With IPE you can find out the server region, city, country, longitude and latitude and much more in seconds.

ProtOSINT is a Python script that helps you investigate Protonmail accounts and ProtonVPN IP addresses
ProtOSINT is a Python script that helps you investigate Protonmail accounts and ProtonVPN IP addresses

ProtOSINT ProtOSINT is a Python script that helps you investigate ProtonMail accounts and ProtonVPN IP addresses. Description This tool can help you i

Python Scrcpy Client - allows you to view and control android device in realtime
Python Scrcpy Client - allows you to view and control android device in realtime

Python Scrcpy Client This package allows you to view and control android device in realtime. Note: This gif is compressed and experience lower quality

Comments
  • Error running store_checker

    Error running store_checker

    I get:

    line 373 in store_checker = StoreChecker() TypeError: StoreChecker.Init() missing 1 required positional argument: 'username'

    I installed all dependencies. This is when i run the store_checker script, and all the config parameters are programmed.

    This is all from ubuntu 22.04.1 LTS (Desktop)

    opened by Fiberopt1986 2
  • Error running script

    Error running script

    Just creating new ticket and referencing the old ticket, as I commented after it was closed, but not sure if it will be seen>

    Let me back up. I did run the monitor.py file, and i had some errors initially there, and that is why i was trying to invoke the store checker to skip the telegram piece, as i thought it was a telegram issue. Now that I know that you cannot do that, here is the issue i have when running the monitor.py file:

    I get the following errors:

    New monitoring session! IP address: 192.168.190.129 Traceback (most recent call last): File "/home/username/Apple Notifier Scripts/Apple-Store-Stock-Notifier/monitor.py", line 350, in monitor = Monitor() File "/home/username/Apple Notifier Scripts/Apple-Store-Stock-Notifier/monitor.py", line 170, in init client.loop.run_until_complete(self.start_monitoring(client)) File "/usr/lib/python3.10/asyncio/base_events.py", line 646, in run_until_complete return future.result() File "/home/username/Apple Notifier Scripts/Apple-Store-Stock-Notifier/monitor.py", line 180, in start_monitoring await send(client, message) File "/home/username/Apple Notifier Scripts/Apple-Store-Stock-Notifier/utils.py", line 20, in send await client.send_message(username, message) File "/home/username/.local/lib/python3.10/site-packages/telethon/client/messages.py", line 853, in send_message result = await self(request) File "/home/username/.local/lib/python3.10/site-packages/telethon/client/users.py", line 30, in call return await self._call(self._sender, request, ordered=ordered) File "/home/username/.local/lib/python3.10/site-packages/telethon/client/users.py", line 79, in _call result = await future telethon.errors.rpcerrorlist.UserIsBotError: Bots can't send messages to other bots (caused by SendMessageRequest)

    That last error. I am definitely not sending from a bot to another bot. My username is my regular telegram username (tried with @ and without @), and the API_ID / hash was generated under the api section of my account. The bot_token was the token that was provided when creating the bot.

    I also tried removing the *.session files with no luck.

    Lastly, I also tried creating a completely different account with different phone number for the bot, so that i can validate 100% that the bot and my user was under a different account, and i got the same error.

    Originally posted by @Fiberopt1986 in https://github.com/fjwillemsen/Apple-Store-Stock-Notifier/issues/3#issuecomment-1293504069

    opened by Fiberopt1986 0
  • Getting : rpcerrorlist.ApiIdInvalidError:

    Getting : rpcerrorlist.ApiIdInvalidError:

    
     File "/Library/Frameworks/Python.framework/Versions/3.10/lib/python3.10/asyncio/base_events.py", line 646, in run_until_complete
        return future.result()
      File "/Library/Frameworks/Python.framework/Versions/3.10/lib/python3.10/site-packages/telethon/client/auth.py", line 182, in _start
        await self.sign_in(bot_token=bot_token)
      File "/Library/Frameworks/Python.framework/Versions/3.10/lib/python3.10/site-packages/telethon/client/auth.py", line 368, in sign_in
        result = await self(request)
      File "/Library/Frameworks/Python.framework/Versions/3.10/lib/python3.10/site-packages/telethon/client/users.py", line 30, in __call__
        return await self._call(self._sender, request, ordered=ordered)
      File "/Library/Frameworks/Python.framework/Versions/3.10/lib/python3.10/site-packages/telethon/client/users.py", line 79, in _call
        result = await future
    telethon.errors.rpcerrorlist.ApiIdInvalidError: The api_id/api_hash combination is invalid (caused by ImportBotAuthorizationRequest)
    
    

    Getting above error Will this work for iPHONE 14. ?

    opened by advaidg 0
Releases(v0.1.0)
Owner
Floris-Jan Willemsen
Hi! My name is Floris-Jan and I'm a Computer Science student from Holland. I've always been fascinated by computers and have a passion for programming.
Floris-Jan Willemsen
A python 3 library which helps in using nmap port scanner.

A python 3 library which helps in using nmap port scanner. This is done by converting each nmap command into a callable python3 method or function. System administrators can now automatic nmap scans

Nmmapper 179 Dec 19, 2022
Utility for converting IP Fabric webhooks into a Teams format.

IP Fabric Webhook Integration for Microsoft Teams and/or Slack Setup IP Fabric Setup Go to Settings Webhooks Add webhook Provide a name URL will b

Community Fabric 1 Jan 26, 2022
Tool written on Python that locate all up host on your subnet

HOSTSCAN Easy to use command line network host scanner. From noob to noobs. Dependencies Nmap 7.92 or superior Python 3.9 or superior All requirements

NexCreep 4 Feb 27, 2022
It can be used both locally and remotely (indicating IP and port)

It can be used both locally and remotely (indicating IP and port). It automatically finds the offset to the Instruction Pointer stored in the stack.

DiegoAltF4 13 Dec 29, 2022
A simple electrical network analyzer, BASED ON computer-aided design.

Electrical Network Analyzer A simple electrical network analyzer. Given the oriented graph of the electrical network (circut), BASED ON computer-aided

Ahmad Abdulrahman 4 Oct 15, 2022
List of ngrok alternatives and other ngrok-like tunneling software and services. Focus on self-hosting.

List of ngrok alternatives and other ngrok-like tunneling software and services. Focus on self-hosting.

Anders Pitman 7.3k Jan 03, 2023
A simple implementation of an RPC toolkit

Simple RPC With Raw Sockets Repository for the Data network course project: Introduction In this project, you will attempt to code a simple implementa

Milad Samimifar 1 Mar 25, 2022
A simple tcpdump sidecar injector to demonstrate Kubernetes's Mutating Webhook

k8s-tcpdump-webhook A simple tcpdump sidecar injector to demonstrate Kubernetes's Mutating Webhook Build and Deploy Build docker image; docker build -

Bilal Ünal 2 Sep 01, 2022
This python script can change the mac address after some attack

MAC-changer Hello people, this python script was written for people who want to change the mac address after some attack, I know there are many ways t

5 Oct 10, 2022
GhostVPN - Simple and lightweight TUI application for CyberGhostVPN

GhostVPN Simple and lightweight TUI application for CyberGhostVPN. Screenshot Us

Mehmet Ali KERİMOĞLU 5 Jul 27, 2022
A Simple Web Server made by Python3.

A Simple Web Server made by Python3.

GGN_2015 2 Nov 27, 2021
Blockchain-Enabled IoT Sensor Framework that uses Augmented Reality and Artificial Intelligence.

Arduino + Raspberry Pi + Unity3D + Cloud + Hyperledger Our Mission: Keep it simple, leave no one behind. Blockchain-Enabled Smart Sensor Framework usi

DappAR 23 Dec 05, 2021
Simple local RPG turn-based to play while learn something using the anki system

Simple local RPG turn-based to play while learn something using the anki system

Raphael Kieling 5 Aug 02, 2022
Whoisss is a website information gatharing Tool.

Whoisss Whoisss is a website information gatharing Tool. You can cse it to collect information about website. Usage apt-get update apt-get upgrade pkg

Md. Nur habib 2 Jan 23, 2022
netpy - more than implementation of netcat 🐍🔥

netpy - more than implementation of netcat 🐍🔥

Mahmoud S. ElGammal 1 Jan 26, 2022
Malcolm is a powerful, easily deployable network traffic analysis tool suite for full packet capture artifacts (PCAP files) and Zeek logs.

Malcolm is a powerful, easily deployable network traffic analysis tool suite for full packet capture artifacts (PCAP files) and Zeek logs.

Cybersecurity and Infrastructure Security Agency 1.3k Jan 08, 2023
Jogo da forca simples com conexão entre cliente e servidor utilizando TCP.

JogoDaForcaTCP Um jogo da forca simples com conexão entre cliente e servidor utilizando o protocólo TCP. Como jogar: Habilite a porta 20000, inicie o

Kelvin Santos 1 Dec 01, 2021
This is a simple python script to collect sub-domains from hackertarget API

Domain-Scraper 🌐 This is a simple python script to collect sub-domains from hackertarget API Note : This is tool is limited to 20 Queries / day with

CHINO TECH TOOLS 4 Sep 09, 2021
NanoChat - nano chat server and client

NanoChat This is a work in progress! NanoChat is an application for connecting with your friends using Python that uses ONLY default Python libraries.

Miss Bliss 1 Nov 13, 2021
Terminal based chat - networking project with sockets in python

Terminal based chat - networking project with sockets in python

2 Jan 24, 2022